Installation Guide

APPLIQUES & ONLAYS
installation instructions
TOOL & MATERIAL
CHECKLIST
SAFETY INSTRUCTIONS
SPECIAL INSTRUCTIONS
AND NOTES
STEP BY STEP
INSTRUCTIONS
EXAMPLE
INSTALLATION DIAGRAMS
• It is highly recommended that you paint/nish our appliques before you install them.
Once installed, you can apply any necessary touch‐up paint/nish.
• Clean installation surface and back of appliques of all dirt and dust with a clean cloth or
sponge.
• Make sure that the surface and the back of the applique are completely dry before
attempting installation.
• Measure and mark the location where the applique is going to be installed.
1. Lay the applique face down on a soft surface that
will not scratch/dent theapplique detail.
2. Apply a 1/2” bead of adhesive caulk all the way
around the back edge of theapplique.
3. When pressing the applique up against the sur-
face, some adhesive caulk will seep out. Smooth
excess caulk around the applique with a nger or
the putty
4. knife and apply extra caulk that is needed to ll
in any gaps.
5. Wipe off any excess adhesive caulk with a sponge
or damp rag.
6. Larger appliques will need to be installed with
nails in addition to theadhesive.
construction adhesive
elastomeric adhesive caulk
caulking gun
nail gun
nishing nails
extra ne sandpaper
putty knife
Make sure to use the correct tools recommended.
Wear proper protective gear.
Follow xture, power tools, paint manufacturers’ instructions, and users manuals.
Use common sense and follow good construction practices.