Installation Guide

ManualsBrandsEkena Millwork ManualsGable Brackets96-in W x 48-in H x 2-in D x 6-in F, 12/12 Pitch, Redmond Architectural Grade PVC Gable Bracket

PVC GABLE BRACKET

installation instructions:

TOOL & MATERIAL

CHECKLIST

IMPORTANT INFO

• It is highly recommended that you paint/nish our brackets before installation.

• Once installed, you can apply any necessary touch‐up paint/nish.

• Clean installation surface and bracket of all dirt and dust with a clean cloth or dry sponge.

• Measure and mark the location where the bracket is going to be installed.

• All PVC brackets are decorative only and for some models the legs (bracket extensions) are

built as solid hollow channels to slip over wood blocking strips for easy installation.

• Wood blocking strips should t snugly into the back of bracket.

SAFETY INSTRUCTIONS

Make sure to use the correct tools recommended.

Wear safety goggles.

Follow xture, power tools, and paint manufacturers’ instructions and users manuals.

Use common sense and follow good construction practices.

Gable brackets are not load‐ bearing, decorative use only.

electric drill

drill bit for pilot hole

countersink bit

lag screws & washers

caulk

sand paper

wood blocks

construction adhesive

caulking gun

mechanical fasteners

Hollow Bracket

1. Attach wood blocks to surface with screws.

2. The top and back pieces of bracket will easily “slip” over wood

blocking strips.

3. Screw through side of bracket into wood blocks to properly

secure.

4. Use acrylic caulk to seal edges of bracket against surface

after installation.

5. Fill in any holes with caulk and smooth the surface with nger.

6. Let caulk dry. Once dry, lightly sand with extra ne sandpaper.

7. Touchup bracket with paint as needed.

Solid Bracket

1. Mark placement of screw holes using a pencil or maker.

2. Drill a pilot hole using the proper sized drill bit for your lag

screw.

3. If you wish to countersink the screws, use the countersink bit

to drill a hole deep enough to hide the head of the screw.

4. Using the pilot hole fasten the bracket to the surface making

sure that the screws lock into a post or beam.

5. Fill in the screw holes with caulk and sand to nish.

6. Touchup paint as needed.

We Can Help. Call (866) 607-0453

www.ekenamillwork.comIndustry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork

Summary of content (13 pages)

PAGE 1
installation instructions: PVC GABLE BRACKET SAFETY INSTRUCTIONS Make sure to use the correct tools recommended. Wear safety goggles. Follow fixture, power tools, and paint manufacturers’ instructions and users manuals. Use common sense and follow good construction practices. Gable brackets are not load‐ bearing, decorative use only.
PAGE 2
ARCHITECTURAL PVC FAQS What is PVC? Each piece of Cellular PVC is made of stable high-density PVC that won't rot, split or chip, and doesn’t absorb water. PVC has a closed cell nature, so water cannot penetrate the product and it resists all forms of insect infestations, mold and mildew. What types of special skills are needed to install PVC products? None. If you can install wood products, you can easily install PVC products. They can be nailed, cut and sanded just like wood products.
PAGE 3
ARCHITECTURAL PVC FAQS What paint can I use on PVC? If you choose to paint, use 100% acrylic latex paint with an LRV of 55 or higher. Definition of LRV (Light Reflective Value): LRV is the amount of light reflected from a painted surface. Black has a reflectance value of Zero (0) and absorbs all light and heat. White has a reflectance value of nearly 100 and keeps a building light and cool. All colors fit between these two extremes. Light Reflective Values are given as a percentage.
PAGE 4
PERF OR RM MANC MA AN A NC N CE A AN N D PPROTE R O T C TION YOU OU CAN C COUN CO OU O UNT O ON N.
PAGE 5
YOU C AN DEPEND ON IT. S U P E RPAI N T ® P ER FO R M ANCE HAS STOOD THE TES T OF T IME . You can count on SuperPaint Exterior Latex Paint to deliver outstanding performance and protection against the elements. peeling and blistering in hot and humid conditions. With its fast, efficient application, SuperPaint will increase your production year-round. And with its ability to withstand the elements, it will minimize repaints, keep costs down, and lead to more satisfied customers and referrals.
PAGE 6
Resilience RESI LI EN C E ® LETS YOU PAINT W ITH CONF IDEN C E N O MATTER W HAT THE F OREC AST.
PAGE 7
TH I S H I G H-HIDING EXTERIOR F INIS H FE ATU R ES EASY APPLIC ATION, A PREM IUM SM OOT H FI NI SH AN D EXC EPTIONAL M OIS TURE RES IS TANC E . hours rather than the four-hour minimum most coatings require. Resilience® Paint is the perfect choice for residential and commercial exteriors. It has outstanding hide, easy brushability and exceptional resistance to moisture. With premium durability, backed by a lifetime limited warranty, you can count on Resilience no matter what the forecast.
PAGE 8
Emerald R EVO LUTIONARY TECHNOLOGY. BEST- I N - C LASS OVERALL PERF ORM ANCE.
PAGE 9
EXC EP TI ONAL DURAB ILITY, BEAUTY AND APPLIC ATION. Emerald® Exterior Acrylic Latex is a breakthrough paint technology from Sherwin-Williams, offering premium performance that stands the test of time. Featuring rugged resistance to blistering, peeling, chalking, fading and dirt pickup, Emerald is self-priming and can be applied in temperatures down to 35°F. Emerald delivers innovative durability, hide and beauty for a truly outstanding finish.
PAGE 10
Duration ® FO R EXC ELL ENT DURABILITY AND HIDE.
PAGE 11
O N E- C OAT C O N VENIENCE ON REPAINTS . EXCEL L E N T R ESI STAN C E TO PEELING AND BLIS TERING. Duration® Exterior Coating is formulated with PermaLast™ Technology and infused with advanced acrylic co-polymers for long-lasting performance. Duration has a high film build and provides a thick, flexible layer which results in excellent hide and protection from peeling and blistering. And Duration now has a longer open time to easily achieve a smooth appearance.
PAGE 12
SnapDry D ELI VER S A HARD, DURABLE F INIS H, FAS T.
PAGE 13
OU TS TANDING RESULTS , WITHOUT THE WAIT. SnapDry™ Interior/Exterior Door and Trim Paint dries in a fraction of the time of other trim paints. With sleek, appealing results in as little as an hour, you’ll increase efficiency and reduce downtime. SnapDry eliminates the need to leave doors and windows open for hours after application. It also delivers a durable finish that will stand the test of time, both inside and out.