Operation Manual

8
Key Sequence Display
To activate the process for all the
memory slots, hold down 7 key for 5”.
clearing station frequencies automatically
To activate the process, hold down key 9 for 5”.
When the automatic programming begins the screen will display the word “AUTO” .
The control unit will store into memory the stations that are received with the highest quality,
ordered from lowest frequency (87.5 MHz) to highest frequency (108.0 MHz).
The system will use all the memory slots available, reaching the maximum of 30.
The process can take a few moments. Once the scan has been completed or once the
maximum number of memory slots has been used, the process ends and a BEEP signal
sounds.
storing station frequencies automatically
4.5 Storing and Clearing Station Frequencies Automatically
To adjust the automatic station search sensitivity (see 4.1. Station Search),
hold down the 1 and 3 keys (1=minimum, 3= maximum) for 5”
4.6 Adjusting Station Search Sensitivity
AUTO
SENS 2
BIP
5’’
5’’
5’’
5’’
AUTO
9
PGR ALL
9
PGR ALL
9
PGR ALL
9
PRG ALL
3
3
3
3
2
2
1
1
1
1
7
DEL ALL
7
DEL ALL
7
DEL ALL
7
DEL ALL
DEL MEM
5’’