Brochure

SPECIFICATIONS BD80 BD80-XE
Model No. 10264SR-US 10264GR-US
Height 34” (863mm) 34” (863mm)
Width 17” (431mm) 17” (431mm)
Depth 26” (660mm) 26” (660mm)
Weight 97 lbs (44kg) 101 lbs (46kg)
Voltage 110 V 110 V
Phase 1 1
Frequency 60 Hz 60 Hz
Current 7 A 7 A
Power 880W 880W
Airflow 360cfm
(608m3/hr)
360cfm
(608m3/hr)
Noise Level 57 dba 57 dba
Refrigerant R407c R407c
Effective Volume 8,369 cu.ft
(237m3)
8,369 cu.ft
(237m3)
Typical Extraction 56 ppd 56 ppd
Minimum Operating Temp 33°F (1°C) 33°F (1°C)
Maximum Operating Temp 95°F (35°C) 95°F (35°C)
FEATURES BD80 BD80XE
MODEL NO. 10264SR-US 10264GR-US
On / Off Control

Electronic Defrost Control

Compressor Type Rotary Rotary
Fitted Mains Plug

Rugged Wheels

Integral Condensate Pump

Pump Purge Switch

Hours Run Meter

Hot Gas Defrost System

Quick Release Hose Coupling

25’ Length of PVC Drain Hose

Epoxy Powder Coating

Cable Wrap Facility

Quite Operation

Gravity Drain

BD80 & BD80-XE DEHUMIDIFIER
APPLICATION
The EIPL BD80 range of Professional Dehumidifiers are the ideal units for commercial and
residential work. Its compact size permits one-man operation, yet it has the capacity to
handle several room-size areas at a time. Best of all, it’s affordably priced within the budget
of most restoration specialists.
KEY DESIGN FEATURES
• Rugged wheels
• Integral Handle for easy transport
• Hours Run Meter providing accurate run
time measurements
• High efficiency rotary compressor.
• Extra long power cord (16’)
• EIPL’s unique “Hot Gas” defrosting
feature which automatically melts
away frost buildup providing effective
operation at low ambient temperatures.
• Rugged, epoxy powder-coated steel
chassis and housing.
• Simplicity of installation and operation
with a standard 115V plug .
• BD80-EX – ADDITIONAL FEATURES
• Integral condensate pump capable of
20’ vertical lift
• Extra long drain hose (25’)
HIGH CAPACITY • COMPACT • LOW TEMPERATURE
DEHUMIDIFIERS FOR PROFESIONAL
WATER DAMAGE AND CARPET SPECIALISTS
SPECIFICATIONS