Use and Care Manual
56-VOLT POWER INVERTER 11
OPERATION
WARNING: Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufcient to inict serious injury.
WARNING: Do not modify or attempt to repair the power inverter except as
indicated in the instructions for use and care.
WARNING: This device is intended to be used indoors only. Do not use outdoors
under any conditions.
The power inverter provides two USB ports and one AC port. The two USB ports
combined supply a maximum of 5V DC, up to 4.2 A output to power small USB devices,
like your cell phone, MP3 player, etc. The AC port supplies a 120V AC, max.150W output
to power the small AC devices, such as a laptop computer.
NOTE: Fully charge your EGO POWER+ battery pack before rst use. The battery
should be charged in a location where the temperature is greater than 41°F (5°C) and
less than 104°F (40°C).
1. Align the mounting slots on the power inverter with the ribs on the battery pack,
then move the power inverter towards the battery pack until it snaps into position
(Fig. 2).
NOTE: Make sure that the spring latch on the power inverter snaps into place and the
battery pack is secured to the tool before beginning operation.
2
Mounting slot
Assemble
Separate