User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
3 N/A N/A 2
Connect PALM REST's TOUCHPAD wires and
SPEAKER wires on M/B's terminal as shown in the
diagram.
Insert FFC: If there is rugged
edge on LOWER COVER hook,
tidy it up before assembling.
N/A
4 Tape (around 3~4cm) 61-080022-00 2
Arrange SPEAKER wires and fix them with tape as
shown in the diagram; install PALM REST into BASE
Note CAP wire arrangement:
Arrange wires as shown in the
diagram.
N/A
PAGE: 12
E12B-#8019/#8131 PALM REST KIT
(Twinhead S.O.P) (Document NO): TESOP389
Name of S.O.P: efio!121i System Ass'y SOP
Working name: 7061
Explanation of illustrations
N/A77-643009-00 1 Check appearance to make sure there are no scratches. N/A1
N/A N/ADate mark2 63-000042-XX 1
Attach date mark on palm rest panel's iron part as
shown in the diagram.
2
Check left and right buttons:
Press each of the button's four
corners separately. If a corner
has an obviously different feel,
the buttons are not set properly.
Check left and right buttons:
Press each of the button's four
corners separately. If a corner
has an obviously different feel,
the buttons are not set properly.
3
Arrange wires here
as shown.
1
4
Twinhead International Corp.