User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
2 E12T-MDC MODEM HARNESS 29-001734-00 1 Connect Modem HARNESS on MODEM port NA NA
5 Heat melt glue NA 2
Connect modem wires on M/B; arrange modem wires as
shown in the diagram.
N/A N/A
Apply glue as shown in the diagram.
Arrange wires at corner: Do not
arrange inside red circle.
N/A
Assemble MODEM card on M/B: Tighten two screws
up in a.b. sequence as shown in the diagram.
N/A
PAGE: 04
3 SCREW ISOT M2.0 X 3.0L 41-721520-03
NA 1
Electrical screwdriver/Torque:
1.5±0.5Kgf-cm
4
(Twinhead S.O.P) (Document NO): TESOP389
Working name: 7053Name of S.O.P: efio!121i System Ass'y SOP
NA
1
2
Explanation of illustrations
MDC MODEM CARD-SMART
LINK-MDC56S-I
NACheck appearance to make sure there are no scratches.76-060007-00 1
3
a
2
1
b
4
Arrange wire
s
under rack
Arrange wires a
t
corner: Do not
arrange inside red
circle.
5
a
b
Twinhead International Corp.