User Guide

Revision: 0 Date: 2004.2.26 (Manufacturing Section): PE
Difference Operating item Part name/specification Part/number Q'TY Operation description Important note Jig/fixture
1
E12T-HDD SPONGE FOR LOWER UP
SIDE-D4688A
51-036041-10 1
Attach conductive sponge on lower cover as shown
in the diagram
N/A N/A
2
E12T-HDD SPONGE FOR LOWER
DOWN SIDE-D4689A
51-036042-10 1
Attach conductive sponge on lower cover as shown
in the diagram
N/A N/A
3
CONDUCTIVE SPONGE
(5X3.5X40mm)
51-350094-02 1
Attach conductive sponge on lower cover as shown
in the diagram
Push the rubber in proper position. N/A
4
CONDUCTIVE SPONGE
(6X6.5X40mm)
51-350094-04 1
Attach conductive sponge on lower cover as shown
in the diagram
Push the rubber in proper position. N/A
P22AJ-RUBBER FOOT-PANTONE
428C
52-000000-20
E12B2 N222S1-RUBBER FOOT 52-000000-00
E12T-DC INDICATOR-PANTONE
428C
50-023107-10 1 Attach round shaped Mylar as shown in the diagram. N/A N/A
E12B2 E12B-DC INDICATOR-BLACK 50-023107-20 1
7 N/A N/A 1
Place lower down side into protective bag and place
into loading device.
N/A N/A
Explanation of illustrations
PAGE: 04
(Twinhead S.O.P) (Document NO): TESOP387
Name of S.O.P: efio!121i UPPER COVER SOP Working name: 6502-2
5 2 Attach rubber foot pad Push the rubber in proper position. N/A
6
1
2
Push the rubber
in proper
position.
Push the rubber in
proper position.
5
6
3
4
Twinhead International Corp.