Owner's manual

ManualsBrandsEdsal ManualsFurniture7003

Use Caution when handling and assembling metal parts. The metal may have sharp edges or corners. The

use of protective gloves is recommended. This unit should be securely anchored to a wall with suitable fas-

teners. Do not use this unit for anything that is outside the designed function of storage. Do not store loose

or heavy items on the top shelves or on the top of the unit, for they create a falling hazard that can injure

yourself or others. Always remember to use proper lifting techniques when moving either the boxed or as-

sembled unit.

Safety Instructions

It is recommended that the cabinets are assembled by more than one person. The use of a raised flat surface dur-

ing assembly is highly recommended. During shipping and handling, some of the tabs that are used for assembly

may have closed together. Use a flat tipped screwdriver to either pry up or push from behind the tab to re-open.

Make sure that the unit is placed on a level surface, as this may effect the performance of the unit.

General instructions

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free to contact our Edsal

manufacturing facility at, (773) 475-3000 and request customer service. We can also be reached on the internet at the following email

address : customerservice@edsal.com.

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

(F) Bottom

(G) Shelf

Required Tools

- Rubber Mallet

- Small Blade Screwdriver

- Small Philips Screwdriver

(handle assembly)

(I) Right Hand Door

(J) Left Hand Door

(K) Door Rods

(H) Shelf Clips

Consumer Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609

www.edsal.com

Made In China

Quick Assemble Wardrobe Cabinet

Right Hand Back

Left Hand Back

Right Hand Side

Left Hand Side

Top

Bottom

Shelf

Shelf Clips

Right Hand Door

Left Hand Door

Door Rods

Kick Plate

Handle

Hanger Rod

10-24X3/8”

Screw & Nut

Anchor Hardware

(IF SUPPLIED)

CBBK7218R KA

CBBK7218L KA

CBSD7222R KA

CBSD7222L KA

CBTO3922 KA

CBBO3718 KA

CCSH3719-2 KA

7000CLP

CBDO6718R KA

CBDO6718L KA

CCDR3325 KA

CBKP3606 KA

201L

CCHG4102

F102438S & N

TB2

(L) Kick Plate

(E) Top

(M) Handle

(P) Anchor Hardware

(suggested type of hardware, NOT

ALL UNITS ARE SUPPLIED)

(A) Right Hand Back

(B) Left Hand Back

(D) Left Hand Side

Page 1

(N) Hanger Rod

(O) 10-24 x 3/8”

Screws & Nuts

MODELS

RTA7003

1UFA1

1UFA2

1UFA3

Part List & Product Specification

(patent pending)

Reference

Description

1 Shelf

–

72” h x 18” d x 36” w

RTA7003

1UFA1

1UFA2

1UFA3

Summary of content (4 pages)

PAGE 1
Quick Assemble Wardrobe Cabinet MODELS RTA7003 RTA7003--1UFA1 1UFA1--1UFA2 1UFA2--1UFA3 Page 1 (M) Handle (L) Kick Plate (N) Hanger Rod (K) Door Rods (C) Right Hand Side (A) Right Hand Back (I) Right Hand Door (D) Left Hand Side (B) Left Hand Back (O) 10-24 x 3/8” Screws & Nuts (P) Anchor Hardware (J) Left Hand Door (suggested type of hardware, NOT ALL UNITS ARE SUPPLIED) (H) Shelf Clips Required Tools (E) Top (F) Bottom (G) Shelf - Rubber Mallet - Small Blade Screwdriver - Small Philips Sc
PAGE 2
Assembly Instructions : Edsal 7003 Quick Assemble Wardrobe Cabinet Page 2 Important Please Read First This instruction sheet was designed to help you assemble this unit in the proper way, please follow them using all parts and fasteners provided. Any alteration or deviation from this instruction sheet can result in unit failure. If you have any assembly problems or questions, please feel free to contact our Edsal manufacturing facility at (773) 475-3000 during the hours of 9:00 a.m. to 5:00 p.m.
PAGE 3
Assembly Instructions : Edsal 7003 Quick Assemble Wardrobe Cabinet Page 3 Figure 2 - Side Assembly Step 2 - Side Assembly First step is to identify the right side panel and the left side panel. Identify by taking one of the panels and place the tab edge facing down. Notice the hinges are now facing up. Now look at the top and bottom edges. The top of the side has a notches on the flanges, and the bottom has a bend inward (see figure 2).
PAGE 4
Assembly Instructions : Edsal 7003 Quick Assemble Wardrobe Cabinet Step 5 - Shelf & Hanger Bar Assembly Page 4 Figure 5 - Shelf Assembly Screw Locations For Hanger Bar The unit is now ready for the shelf and hanger bar. First select a level for the shelf by selecting a set of square notches located inside the unit on the back left and back right sides. A series of round holes are located on the inside of the left and right hand side panels near the hinges.