Operation Manual

Edimax Pro NMS
189
Advanced Settings
Product Name
Edit the product name according to your
preference consisting of 1-32 alphanumeric
characters. This name is used for reference
purposes.
Management
Protocol
Check/uncheck the boxes to enable/disable
specified management interfaces (see below).
When SNMP is enabled, complete the SNMP
fields below.
SNMP Version
Select SNMP version appropriate for your
SNMP manager.
SNMP Get
Community
Enter an SNMP Get Community name for
verification with the SNMP manager for
SNMP-GET requests.
SNMP Set
Community
Enter an SNMP Set Community name for
verification with the SNMP manager for
SNMP-SET requests.
SNMP Trap
Enable or disable SNMP Trap to notify SNMP
manager of network errors.
SNMP Trap
Community
Enter an SNMP Trap Community name for
verification with the SNMP manager for
SNMP-TRAP requests.
SNMP Trap
Manager
Specify the IP address or sever name (2-128
alphanumeric characters) of the SNMP
manager.
HTTP
Internet browser HTTP protocol management interface
HTTPS
Internet browser HTTPS protocol management interface
TELNET
Client terminal with telnet protocol management interface
SSH
Client terminal with SSH protocol version 1 or 2 management interface
SNMP
Simple Network Management Protocol. SNMPv1, v2 & v3 protocol supported.
SNMPv2 can be used with community based authentication. SNMPv3 uses
user-based security model (USM) architecture.
IV-7-3-2. Date and Time