Manualshelf

User Manual

ManualsBrandsEdimax ManualsComputers & AccessoriesAdd-on Access Point for PrimeAX 1-2-3 Wi-Fi 6 Smart Managed Wi-Fi System
261262263264265266267268269270
264
4. Device will start rebooting.
XI. Pairing Additional PrimeAX +1
Please follow the steps below to pair additional PrimeAX +1 access point to
the master access point.
1. Connect PrimeAX +1 APs to the same network as the PrimeAX 1-2-3
Master AP. The figure below shows a sample setup of a PrimeAX 1-2-3
Master with different PrimeAX +1 slave units, and connected Wi-Fi clients
defined in network group.
2. Connect the power adapter to the PrimeAX +1 AP and plug the power
adapter into a power supply. Please wait a moment for the AP to start up.
The AP is ready when the LED is Blue.
NOTE:
In our recommandation, please do not add any other Edimax APs to
PrimeAX 1-2-3 Master except PrimeAX +1.
It might have compatibility issues with using different model of AP.