User Manual

II-3. Mounting

To mount the device to a ceiling, please follow the instructions below and

refer to diagram A & B.

Wooden Ceiling:

Please refer to the figure below:

1. By using the holes A on the ceiling bracket, identify and mark correct

screw positions of the desired mounting location.

2. Where necessary, drill a hole (of radius smaller than the radius of the

provided screws) on each of the marked screw positions.

3. Fix the ceiling mount bracket to the desired location by inserting the

ceiling fixing screws B through the bracket ceiling holes A. Tighten the

ceiling fixing screws B to the marked screw position using a screw driver

to fix the bracket in place.

4. Fix the bracket rail screws C into the holes D on the device using a

screw driver. The cap of the screws should be protruding outwardly

from the holes D.

5. Insert the bracket rail screws C into the device fixing holes E.

6. Twist the device as the bracket rail screws C slide through the bracket

rail F.

Twist the device all the way until you feel that it is fixed in position.