Quick Installation Guide

PBC: Push Button Configuration

PBC WPS can be executed from this page by following the steps below:

1. Press the WPS button on your wireless router/access point for the correct

length of time to activate its WPS.

Please check the instructions for your wireless device for how long

you need to hold down its WPS button to activate WPS.

2. Within two minutes, click the “PBC” button in the bottom left of the

“WPS” page. The wireless adapter will establish a connection with your

wireless router/access point.

PIN Code WPS

PIN code WPS includes the additional use of a PIN code between devices. This

is useful for identification and verification purposes in crowded wireless

environments with multiple routers/access points/wireless devices.

1. The wireless adapter’s PIN code is listed in the lower centre of the “WPS”

page next to “PIN”. Go to your wireless router/access point’s web user

interface and input the wireless adapter’s PIN code in the correct location,

and activate PIN code WPS for your wireless router/adapter.

Please check the instructions for your wireless router/access point

for how to access the web user interface and where to input the

PIN code.