Operation Manual

and set the channel to a fixed number, such as 1, 6,

or 11.

7. If the wireless network you selected requires a network security key, enter

it here. If you do not know the network security key then please refer to

IV-2. Appendix How to Find Your Network Security Key. Click “Next” to

continue when finished.

Note: If the network you select shows that it uses

WPA-PSK/WPA2-PSK encryption, then please use

WPA2 AES here. Please do not use WPA2 mixed

mode.

4. You will see a final confirmation screen, listing the settings you have

selected. If everything is correct, click “Set” to continue.

5. The device will save your settings, then reboot. Please do not disconnect or

turn off the device during this process.

6. After the device reboots, you will see a final congratulation screen. Click

“Finish” to complete the setup.