User Manual

N
OTE
:
Some O.S. (Operation Systems) like SCO Unix are unable to support “ Hot Plug ”
function. If you apply “Hot Plug” to this kind of O.S., it will cause unpredictable
behavior or shut down the PC. Before attempting to use “ Hot Plug ” , please make
sure your O.S. and software driver supports the “Hot Plug” function.
On Screen Display Operation
When you pop up the OSD menu window go through the hot key, you will see the following
small window on your monitor.
a. The 1
ST
line bar is Bank no.
b. The 2
nd
block is your PC
system name list. You will find
the system number list from
01 to 04 ( if the current box is
4 port) or from 01 to 8 (if the
current box no. is 8 port)or
from 01 to 16 (if the current
box no. is 16 port). You can
define your PC name in
maximum 8 characters. The
factory default of 16 port KVM
switch PC name is from
“SYSTEM 01”, “SYSTEM
02” ,…, “SYSTEM 16” and 8
port KVM switch is from
“SYSTEM 01”, “SYSTEM
02”,…, “SYSTEM 08”. Besides,
the sun symbol “ ☼ “ near to
the PC name represents the
PC system is powered on.
To use up arrow key “ y “ or down arrow key “ z “ to select port for destination PC name.
A eady, you can press the ENTER Key to switch the
PC port you want immediately
After you have selected the PC port already, you can press the ENTER Key to switch the
PC port you want immediately
fter you have selected the PC port alr
PgDn/PgUp: BANK SELECT
01 SYSTEM 01 02
03
☼
SYSTEM 03 04
05
☼
SYSTEM 05 06
07 SYSTEM 07 08
09 SYSTEM 09
10
11
☼
SYSTEM 11 12
13 SYSTEM 13 14
15
☼
SYSTEM 15 16
©/ª: SELECT PORT
TAB : NEXT INSERT :EDIT
ESC : QUIT ENTER :COMPLETE
SCAN: 1 0 SEC. CONSOLE ON/OFF
OSD : 1 0 SEC. CHANGE PASSWORD
SYSTEM 16
☼
SYSTEM 14
☼
SYSTEM 12
SYSTEM 10
☼
SYSTEM 08
SYSTEM 06
☼
SYSTEM 04
☼
SYSTEM 02 (
BANK : 1
To use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.) To use “ PgUp “ key or “ PgDn” key for selecting previous or next Bank no. (or Box No.)
To press “ INS” key for
editing PC name.
To press “ INS” key for
editing PC name.
01 02
☼
SYST█EM 02
SYSTEM 01
BANK : 1
After finishing the edit, please press “ Enter “ key for saving information. After finishing the edit, please press “ Enter “ key for saving information.
To use “ Tab “ key to select items like Bank, OSD, SCAN, CHANGE PASSWORD, To use “ Tab “ key to select items like Bank, OSD, SCAN, CHANGE PASSWORD,