User's Manual

located at the upper-right position of configuration utility. Remember it,

and input the number to your wireless access point as the WPS PIN code

(Please refer to the user manual of your wireless access point for

instructions about how to do this).

3. Click ‘PIN’ button now, and wait for few seconds to one minute. If a

wireless access point with correct PIN code is found, you’ll be connected

to that access point:

You may have to click ‘PIN’ for few more times to try again. If you still

can not connect to access point by this way, please make sure the PIN

code you provided to access point is correct.

NOTE: The PIN code of every wireless network card is DIFFERENT.

Please don’t use the sample code shown here.