User's Manual

First).
Direct Link Enable or disable direct link setup (DLS) function.
Setup Enable This function will greatly improve the data transfer
rate between WMM-enabled wireless devices.
Please click ‘Apply’ button on the right of this check
box after you check or uncheck this box, so
corresponding settings in this window will be
activated or deactivated respectively.
MAC Address Input the MAC address of another WMM-enabled
wireless device you wish to establish a direct link
here, then click ‘Apply’ to add this MAC address to
DLS address table.
Timeout Value Input the timeout value of this WMM-enabled direct
link wireless device. If the wireless
device is not responding after this time, it will be
removed from DLS table.
Tear Down If you want to remove a specific wireless device
from DLS table, select the device and click this
button to remove it.
After you finish the settings, click ‘OK’ to close configuration utility.