User's Manual

Network Type Select network type (‘Ad Hoc’ or ‘Infrastructure’). If
you’re adding a profile from an existing access
point or wireless device, it’s automatically selected
and you don’t have to change it.
TX Power You can select the radio output power of wireless
network card. You may not need full radio power if
you’re not far from wireless access point, and only
use a high setting here if you found that radio
reception is bad.
If you don’t know which one to use, select ‘Auto’.
Preamble This option is only available when the network type
is ‘Ad hoc’. You can select ‘Auto’ or ‘Long
Preamble’. Please select ‘Auto’ if you don’t know
what it is.
RTS Threshold Check the box and you can set RTS threshold
manually here. Do not modify default setting unless
you know what it is.
Fragment Check the box and you can set fragment threshold
Threshold manually here. Do not modify default setting unless
you know what it is.
Now click ‘Authentication and Security’ tab, and set the encryption and
authentication settings.