User's Manual

Here are descriptions of every setup item:

Band

Please select the wireless band you wish to use. By

selecting different band setting, you‟ll be able to

allow or deny the wireless client of a certain band.

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz

(G), only wireless clients using the wireless band

you select (802.11b, 802.11 Draft-N, or 802.11g)

will be able to connect to this access point.

If you select 2.4GHz (B+G), then only wireless

clients using 802.11b and 802.11g band will be

able to connect to this access point.

If you want to allow 802.11b, 802.11g, and 802.11

Draft-N clients to connect to this access point,

select 2.4GHz (B+G+N).

Channel Number

Please select a channel number you wish to use.

The channel number must be same with another

wireless access point you wish to connect

MAC address 1

Please input the MAC address of the wireless

access point you wish to connect

Set Security

Click this button to select an encryption mode for

this wireless link, a new popup window will

appear. Please refer to Section 2-7 for detailed

descriptions.

After you finish with setting, please click „Apply‟, and the following