Dual Zone Wine and Beverage Refrigerator CWB2886FD Owner’s Manual For more information on other great EdgeStar products on the web, go to http://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.
Important Safety Information Improper handling can cause serious damage to the EdgeStar wine and beverage refrigerator and / or injury to the user. This refrigerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
General Safety • • • • • • • • • • • • • • • • • • • To prevent back and other types of injuries, use at least two people to move and install the wine and beverage refrigerator. This appliance is not intended for use by persons, including children, with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents IMPORTANT SAFETY INFORMATION……………………………………………………………………………………... I TABLE OF CONTENTS……………………………………………………………………………………………………….. III FIRST TIME OPERATING INSTRUCTIONS…………………………………………………………………………………………. 1 INTRODUCTION……………………………………………………………………………………………………………….. 1 PARTS IDENTIFICATION…………………………………………………………………………………………………….. 2 FRONT VIEW……………………………………………………………………………………………………………………… 2 INSTALLING THE WINE AND BEVERAGE REFRIGERATOR…………………………………………………………..
First Time Operating Instructions Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you ever need to move or ship the appliance in the future. Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Parts Identification Front View Back View 2
Carbon Filter A built-in carbon filter protects your beverages by acting as a natural barrier against harmful odors. Internal Fan This is an air-cooled unit equipped with an internal fan that maintains a consistent internal temperature. Note: The Carbon filter should be replaced every 3 - 6 months depending on the unit’s exposure level to odor. If the unit is placed in the kitchen, regular replacement every 3 months is ideal.
Installing the Wine and Beverage Refrigerator The wine and beverage refrigerator should be installed in accordance with local electrical code requirements. The wine and beverage refrigerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty.
Installation Clearance Requirements Important Notes: • • • • Choose a location that has ambient temperatures above 50° F and below 90° F. Operation outside these temperatures may result in lowered efficiency or cause other adverse effects. This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water spray or drips. The wine and beverage refrigerator should not be located next to ovens, grills, or other high heat sources.
Electrical Requirements ELECTRIC SHOCK HAZARD! • Plug into a grounded 3-prong outlet. • Never remove the grounding prong from the plug. • Never use an adapter to bypass the grounding prong. • DO NOT use an extension cord. • Failure to follow these instructions can result in fire, electrical shock, or death.
Installing the Door Handle To install a door handle: 1. Open the door and carefully pull back the door gasket around the area where the handle is to be installed. 2. Insert each Phillips head screw through the gasket side of the door until the screw passes through the door. 3. Align the handle with the screws and tighten using a Phillips head screwdriver until the handle is flush against the door frame. 4. Carefully press the door gasket into its original position. 5. Repeat these steps for the next door.
Operation Installation Check List Before Operation 1. 2. 3. 4. 5.
• The Celsius or Fahrenheit light will be lit depending on which unit of temperature is being displayed. To switch between Celsius and Fahrenheit, press and hold the and buttons at the same time for approximately 5 seconds until the temperature scale changes. Caution: If you powered the unit off, please wait at least 5 minutes before powering it back on. Note: • Allow at least 24 hours before storing your wines to allow the setting temperature to be reached.
Preparing the Wine and Beverage Refrigerator for Storage If the wine and beverage refrigerator will not be used for a long time, or is to be moved to another place, it will be necessary to defrost the unit and dry the interior. 1. Disconnect the wine and beverage refrigerator from the power supply by removing the power plug from the wall socket. 2. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells. Caution: Store the unit out of the reach of children.
Troubleshooting Before Calling for Help If the unit appears to be malfunctioning, read through the “Operation” section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem may be something that can easily be solved or explained. Symptoms The wine and beverage refrigerator turns on and off frequently. The wine and beverage refrigerator does not turn on. The wine and beverage refrigerator will not reach the desired temperature.
Symptoms The body of the wine and beverage refrigerator is electrified. Frost is forming in the wine and beverage refrigerator. Possible Causes The unit is not grounded properly. The doors will not shut properly. The refrigerator is not level. The environment is humid. The ambient temperature is too low. The doors are being opened too frequently. The door gaskets are dirty. The door gaskets are not installed correctly. The shelves are incorrectly installed.
Specifications Note: Technical data and performance information are provided for reference only. Specifications are subject to change. Check the rating label on the wine and beverage refrigerator for the most accurate information. Description of product Dual Zone Built-in Wine and Beverage Refrigerator Model CWB2886FD Voltage / Frequency AC 115V~60Hz Amperage 1.5 A Input Power 130 W Color Black Cabinet; Stainless Steel Doors Storage Capacity 28 Bottles* 86 Standard 12 oz.
Edgestar Limited Warranty Full One-Year Parts and Labor WHAT IS COVERED: This product is warranted by EdgeStar and is subject to any conditions set forth as follows: For a period of ONE (1) YEAR from the date of original retail purchase, EdgeStar will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship.