Assembly instructions ITEM# EM-252 OF-605 ASSEMBLY REQUIREMENT 1 PERSON ASSEMBLY | 30 MINUTES ASSEMBLY TIME {APPROXIMATE} TOOLS REQUIRED: ALLEN WRENCHES {PROVIDED) ASSEMBLY PREPARATION 1. Hover all packaging materials, staples and packing straps from the cation, 2, Refer to Ports Checklist and ensure they are complete before you start assembling. 3. Place all components on a clean, flat and soft surface {e.g. carpel or rug) to prevent parts from getting scratched, TIPS FOR ASSEMBLY 1.
PARTS CHECKLIST 20MM Bolts X4 45MM Bolts ®4 Bolt Caps X4 Cap Covers K8 Rosters STEP L. Attach the it mechanism to the seat using screws A hand tightening sowers and finishing with Allen Wrench, Lease noel the orientation of the front of the seat ang the mechanism. insert the coasters € into the five star base. This may take significant force. Gently squeeze the base cover and place around the center of the 8 star base. Insert the gos it into the center of the Bose.
i L STEP 3. Attach the assembled seat to the assembled Bose by lignin the hole in the til mechanism to the fop of the gas lif, Push down firmly to secure. STEP 4.