CLI Reference Guide-R04

Chapter 3 | General Commands
– 98 –
end This command returns to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Access Control List Configuration, CFM Configuration, Class
Map Configuration, ERPS Configuration, IGMP Profile Configuration, Interface,
Configuration, Line Configuration, Multiple Spanning Tree Configuration, Policy
Map Configuration, Time Range Configuration, and VLAN Database Configuration.
Example
This example shows how to return to the Privileged Exec mode from the Interface
Configuration mode:
Console(config-if)#end
Console#
exit This command returns to the previous configuration mode, exits the configuration
program from the Global Configuration mode, or quits the CLI session from the
Privileged Exec mode..
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global
Configuration mode, and then quit the CLI session:
Console(config)#exit
Console#exit
% CLI exit session
***************************************************************
WARNING - MONITORED ACTIONS AND ACCESSES
Station's information:
Floor / Row / Rack / Sub-Rack
/ / /
DC power supply:
Power Source A: Floor / Row / Rack / Electrical circuit
/ / /