User's Manual

SE-301 Series Electrocardiograph User Manual Settings

- 33 -

5. Make sure the type of USB printer connected is matched with

the type you choose in the Record Device. Error may occur if the

USB printer type is not matched.

USB Record Style Choose from: 3×4, 3×4+1R, 3×4+3R, 6×2, 6×2+1R or 12×1

It defines the style of USB report.

Grid of Report

Choose from: On or Off

When it is set to On, the grid will be printed while printing ECG reports

with the thermal recorder or USB printer.

6.4 Patient Information Setup

Item Description

First/Last Name

Choose from: On or Off

When it is set to On, patient name will be divided into first name and last

name.

Choose from: Auto, Time or Manual

ID Hint

Choose from: On or Off

In the AUTO or RHYT mode, when ID is set to Manual and ID Hint is

set to On, if you do not input the patient ID before pressing the

PRINT/STOP key, a hint will pop up to remind you to input the patient

ID.

Age

Choose from: Age, D.O.B or Age Group

PatInfo Refreshed

Choose from: On

or Off

Select On, the patient information will be refreshed after the ECG report

is printed out and all the leads are off.

H/W Unit

Choose from: cm/kg or inch/lb

BP Unit

Choose from: mmHg or kPa

Order Acquired

Choose from: On or Off

Select On, the Order item will be displayed in the Patient Information

window and you can acquire orders by clicking it.