User's Manual

Patient Monitor User Manual Alarm Information
- 49 -
Message Cause Alarm Level Action Taken
Battery Low
Battery Low
High
Please change the
battery or charging.
Recorder Out Of
Paper
Recorder Out Of Paper Low
Please install the
paper
Recorder setup
needed
The user presses the
RECORD button when the
monitor is not installed
with a recorder.
Low
Notify the
manufacturer’s
service staff to install
and set the recorder.
Removable device is
full
Less than 10M space is left
in the removable device.
Low
Delete some data in
the removable device
or use another
removable device.
Removable dev
read-only
The removable device is
read-only.
Low
Repair the removable
device or replace it
with a new one.
5.3 Prompts
Message Cause
ECG Arr Learning
The QRS template building required for Arr. Analysis is in
process.
SpO
2
Search Pulse
SpO
2
module is analyzing the patient signal and searching
for the pulse to compute the saturation, when sensor is
connected with patient.
Manual Measuring In manual measuring mode
Continual Measuring In continuous measuring mode
Auto Measuring In automatic measuring mode
Measure Abort Measurement over
Calibrating During calibrating
Calibrate Abort Calibration over
Leak Testing During pneumatic test
Leak Test Ok NIBP module has passed leak test.
Leak Test Abort Pneumatic test over