User's Manual

You can manage your ecobee system
using the colour touch screen on the
Smart Thermostat or from your ecobee
personalized web portal. Internet access
lets you:
Program and congure your Smart Thermostat from your
personalized web portal.
Remotely control your Smart Thermostat from anywhere
you have Internet access.
Enable your Smart Thermostat to display and use local
weather data to maximize savings.
Receive important alerts and reminders about your
heating and cooling system.
A 1 year free subscription to the ecobee web portal in-
cluded with the purchase of the smart thermostat.
Note: To connect your system to your personalized ecobee web
portal you must have a broadband Internet connection and a
wireless home network.
Wi Specications
Your Smart Thermostat is designed to support:
A 802.11 b or g wireless router
WEP 64, WEP 128, WPA1 and WPA2 encryption methods
Dynamic and Static IP addressing
Setting up Wi
The Smart Thermostat is equipped with a wireless
interface that connects to any home wireless network.
You must enable the Wi radio in the Smart Thermostat
and congure it in order to access your home wireless
network.
When the Wi radio is turned on, the thermostat
displays a list of available networks, along with an
indication of the signal strength and whether security
encryption is used.
If your home network is not listed, or if the signal strength
is very low, try readjusting the antenna on your wireless
router. If that does not improve the signal you may need
to relocate your router.
Once your network has been detected, press on that list item to
continue with the conguration.
If the network is encrypted you will be asked to enter the password
for that network. This was the password you created when the
wireless network router was rst setup
Using the MAC address
You may have congured your network to lter for known MAC ad-
dresses. If this is the case refer to the section Displaying information
about your ecobee Smart Thermostat on page XX to nd the MAC
address for your Smart Thermostat.
Creating Your Personal Web Portal.
Once a wireless Internet connection is established, you
need to register the thermostat to create your personal
web portal that you can use to remotely manage your
ecobee Smart Thermostat.
Your e-mail and password are not stored in the thermo-
stat. You can change this information once the account
has been registered and activated.
If you do not receive a registration e-mail, please check
your junk mail folder as registration messages are
sometimes agged as junk mail.
Once you have completed the registration process, you
can go to www.ecobee.com to manage your ecobee
Smart Thermostat through your personal web portal
Note: Once registration is complete, the registration button
on the Home Screen is replaced with the Weather button
To register the thermostat:
From the Home Screen,
press Register.
You will be prompted
to enter your primary
e-mail address.
Press Done.
You will be prompted to
enter a password. Enter
a password with a mini-
mum of eight characters.
Press Done.
The Smart Thermostat
sends a registration
message to the specied
e-mail address. This e-
mail includes a link to
www.ecobee.com where
you will need to enter
the password to com-
plete the registration
To set up the Wi radio:
From the Home
screen, Press More.
Press Settings.
Switch Wi on.
Select your network
from the list of
available networks.
7 | 8
CONNECTING YOUR
THERMOSTAT
TO THE INTERNET