Technical Specifications

ManualsBrandsEclectic Products ManualsPaint1 fl. oz. Shoe GOO Adhesive (6-Pack)

PRODUCT DESCRIPTION

SHOE GOO

has been scientically formulated to repair, seal and stick to a wide variety of materials with

superior strength to any other brand. SHOE GOO

contains a resin system designed for stronger abrasion

resistance and better adhesion to exible materials. It even contains heat dissipaters, which disperse heat

away from the shoe and foot. Plastic, metal leather, vinyl, rubber, canvas - SHOE GOO

is the most versa-

tile and eective adhesive available. SHOE GOO

is not formulated for exposure to sunlight. Upon fully

curing SHOE GOO

may be painted over to provide UV protection.

PRODUCT CHARACTERISTICS and BENEFITS

 Flexible Does not become brittle in cold weather. Good for bonding items subject to vibration.

Abrasion resistant Great for bonding objects subject to wear

Waterproof

Submergible in fresh and salt water after completely cured

Paintable Paint to match surrounding area or for UV resistance after completely curing

Washer/Dryer safe

Safe for use on clothing and fabric. Do not dry clean.

PROPERTIES OF UNCURED MATERIAL

 Color Clear and Black

VOC 486 gram/liter

Solvent Toluene, Petroleum distillates (ammable)

Density 7.5 lbs/gal

Solids 46% by weight, 42% by volume

Viscosity 170,000 cps

Tack time 2 minutes

Full cure time in lm: 24 hours; ick lm: 48-72 hours

Storage Store in dry area between 50 and 80 °F (10 and 27 °C)

Freeze/thaw stability Stable; allow product to warm to room temperature before using

Shelf life 1 year (unopened)

PROPERTIES OF CURED MATERIAL

 Chemical resistance Excellent to water, dilute acids and dilute bases

UV resistance No; paint over for UV resistance

Hardness 80 Shore A

Dielectric strength 400V/mil (ASTM D-149); this is the maximum voltage that can be applied to a given

material without causing it to break down

Tensile strength 3800 lb/in

(ASTM D-412)

Elongation 900% (ASTM D-412)

Service temperature -40 to 150 °F (-40 to 66 °C)

Paint-over time 24 hours

T E C H N I C A L

DATA S H E E T

Shoe GOO

Adhesive - Revised: September, 2008 Page 1 of 3

Manufactured by:

Eclectic Products, Inc.

Pineville, LA 71361

Made in the USA

800.767.4667 - Technical Services

www.eclecticproducts.com

www.shoegoo.com

Shoe GOO® Adhesive

From the Maker of Amazing GOOP®

Summary of content (3 pages)

PAGE 1
Manufactured by: Eclectic Products, Inc. Pineville, LA 71361 Made in the USA 800.767.4667 - Technical Services www.eclecticproducts.com www.shoegoo.com TECHNIC AL DATA SHEET Shoe GOO® Adhesive From the Maker of Amazing GOOP® PRODUCT DESCRIPTION SHOE GOO® has been scientifically formulated to repair, seal and stick to a wide variety of materials with superior strength to any other brand.
PAGE 2
TECHNICAL DATA SHEET SOLVENTS THAT DISSOLVE SHOE GOO® ADHESIVE The following lists common solvents that dissolve SHOE GOO® when hardened samples are immersed. The dissolution with these solvents is not instantaneous and therefore does not preclude usage in all cases. Applications where an occasional splash or brief exposure is expected may be acceptable. Test a small area before full use.
PAGE 3
TECHNICAL DATA SHEET HAZARDS This product contains toluene. Before working with this product, read and become familiar with information concerning hazards, proper use and handling. To request an MSDS, please send an Email to msds@eclecticproducts.com or call 800.333.9826. LIMITED WARRANTY The product is warranted against any defect in materials or workmanship under normal use and service for a period of 180 days after the date of purchase.