Manual

Operating instructions
K3G355-AY40-35
Translation of the original operating instructions
3. TECHNICAL DATA
3.1 Product drawing
All measures have the unit mm.
1 Installation position: Shaft horizontal (install the support struts only vertically as shown in the view!) or rotor on bottom; rotor on top on
request
2 Cable diameter min. 4 mm, max. 10 mm, tightening torque 4±0.6 Nm
3 Inlet nozzle with pressure tap (k-factor: 148)
4 Tightening torque 3.5±0.5 Nm
Item no. 51322-5-9970 · ENG · Revision 80345 · Release 2014-05-08 · Page 4 / 12
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com