Datasheet

03/21/2012 HPL-ED2011 V2.0 EN (UX111) 1 / 5

Overload�relay�4�-�6A

Part�no. ZB12-6

Article�no. 278439

Program

Product range   Overload relay ZB up to 150 A

Phase-failure sensitivity   IEC/EN 60947, VDE 0660 Part 102

Description   Test/off button

Reset pushbutton manual/auto

Trip-free release

Mounting type   Direct mounting

A 4 - 6

Contact sequence  

Auxiliary contacts   

N/O = Normally open   1 N/O

N/C = Normally closed   1 N/C

For use with   DILM7, DILM9, DILM12, DILM15,

DIULM7, DIULM9, DIULM12,

SDAINLM12,

SDAINLM16,

SDAINLM22

DS7-34…SX005…

Short-circuit protection   

Type “1” coordination gG/gL A 25

Type “2” coordination gG/gL A 20

Notes

Overload release: tripping class 10 A

Short-circuit protection: Observe the maximum permissible fuse of the contactor with direct device mounting.

Suitable for protection of Ex e-motors.

II (2) GD

PTB 10 ATEX 3010

Observe manual AWB2300-1527D/GB.

Notes

Fitted directly to the contactor



1 Contactor 

 

Approbationen

UL approval Yes

CSA approval Yes

PAGE 1
Overload�relay�4�-�6A Part�no. ZB12-6 Article�no.
PAGE 2
Product Standards UL File No. UL CCN CSA File No. CSA Class No. NA Certification Specially designed for NA Suitable for Max. Voltage Rating Degree of Protection UL 508; CSA-C22.2 No.
PAGE 3
Tightening torque Nm 0.8 - 1.2 Pozidriv screwdriver Size 2 Standard screwdriver mm 1x6 Tools Rated insulation voltage Ui V AC 500 Rated operational voltage Ue V AC 500 V AC 240 6 Safe isolation to VDE 0106 Part 101 and Part 101/A1 between the auxiliary contacts Conventional thermal current Ith A Rated operational current Ie A 120 V Ie A 1.5 240 V Ie A 1.5 415 V Ie A 0.5 500 V Ie A 0.5 120 V Ie A 1.5 240 V Ie A 1.5 415 V Ie A 0.9 500 V Ie A 0.
PAGE 4
These tripping characteristics are mean values of the spread at 20 °C ambient temperature in a cold state. Tripping time depends on response current. On devices at operating temperature the tripping time of the overload relay drops to approx. 25 % of the read value. Specific characteristics for each individual setting range can be found in the manual. 03/21/2012 HPL-ED2011 V2.
PAGE 5
CAD-Data Product standards CAD data: http://eaton-moeller.partcommunity.com Dimensions OFF Reset/ON Additional�product�information�(links) IL03407015Z (IL03407015Z) Overload relay 03/21/2012 ftp://ftp.moeller.net/DOCUMENTATION/AWA_INSTRUCTIONS/IL03407015Z2010_10.pdf Eaton Industries GmbH http://www.moeller.net/en © 07/2011 by Eaton Industries GmbH HPL-ED2011 V2.