Datasheet

ManualsBrandsEaton ManualsPOWERSMD Transformer, 500V

Description

• Six winding, surface mount devices that

offer more than 500 usable inductor or

transformer configurations

• High power density and low profile

• Low radiated noise and tightly coupled windings

• Power range from 1 Watt – 70 Watts

• Frequency range to over 1MHz

• 500 VAC Isolation

• Ferrite core material

Applications

• Inductors: buck, boost, coupled, choke, filter, resonant,

noise filtering, differential, forward, common mode

• Transformers: flyback, feed forward, push-pull, multiple

output, inverter, step-up, step-down, gate drive, base

drive, wide band, pulse, control, impedance, isolation,

bridging, ringer, converter, auto

Environmental Data

• Storage temperature range: -55°C to 125°C

• Operating ambient temperature range: -40°C to +85°C

(range is application specific). The internal “hot spot”

temperature defines the maximum allowable currents,

which are limited to 130°C, including ambient

• Solder reflow temperature: +260°C max for 10 seconds

max.

Packaging

•

Supplied in tape and reel packaging, 600 (VP01),

300 (VP02), and 200 (VP03) per reel

• Supplied in bulk packaging (VP04 and VP05)

• VP04 & VP05 tape and reel packaging available.

Please contact factory for details.

VERSA-PAC

Inductors and Transformers

(Surface Mount)

Leakage Thermal

Part

(1)

L(BASE)ISAT(BASE)IRMS(BASE)R(BASE) Volt-µSEC(BASE)EPEAK(BASE) Inductance Resistance

Number µH Amps

Amps

Ohms µVs µJ (

BASE) µH °C/W

att

(NOM)

(2)

(TYP)

(3)(4)

(TYP)

(3)(5)

(MAX)

(6)

(MAX)

(7)

(TYP)

(8)

(TYP) (TYP)

(9)

VPH1-1400-R

(10)

201.6 +/-30% 0.04 0.55 0.344 32.9

0.11 0.212 60.7

VP1-1400-R

(10)

89.6 +/-30% 0.06 0.85 0.145 21.8 0.11 0.096 60.7

VPH1-0190-R 27.4 +/-20% 0.29 0.55 0.344 32.9 0.77

0.212 60.7

VP1-0190-R 12.2 +/-20% 0.43 0.85 0.145 21.8 0.77 0.096 60.7

VPH1-0102-R 14.7 +/-20% 0.53 0.55 0.344 32.9 1.45 0.212 60.7

VP1-0102-R 6.5 +/-20% 0.80 0.85 0.145 21.8 1.45 0.096 60.7

VPH1-0076-R 10.9 +/-20% 0.72 0.55 0.344 32.9 1.92 0.212 60.7

VP1-0076-R 4.9 +/-20% 1.06 0.85 0.145 21.8 1.92 0.096 60.7

VPH1-0059-R 8.5 +/-20% 0.92 0.55 0.344 32.9 2.48 0.212 60.7

VP1-0059-R 3.8 +/-20% 1.37 0.85 0.145 21.8 2.48 0.096 60.7

VPH2-1600-R

(10)

160 +/-30% 0.07 0.95 0.159 48.3 0.29 0.165 44.0

VP2-1600-R

(10)

78.4 +/-30% 0.10 1.26 0.090 33.7 0.29 0.083 44.0

VPH2-0216-R 21.6 +/-20% 0.53 0.95 0.159 48.3 2.11 0.165 44.0

VP2-0216-R 10.6 +/-20% 0.76 1.26 0.090 33.7 2.11 0.083 44.0

VPH2-0116-R 11.6 +/-20% 0.99 0.95 0.159 48.3 3.94 0.165 44.0

VP2-0116-R 5.7 +/-20% 1.41 1.26 0.090 33.7 3.94 0.083 44.0

VPH2-0083-R 8.3 +/-20% 1.39 0.95 0.159 48.3 5.47 0.165 44.0

VP2-0083-R 4.1 +/-20% 1.95 1.26 0.090 33.7 5.47 0.083 44.0

VPH2-0066-R 6.6 +/-20% 1.74 0.95 0.159 48.3 7.01 0.165 44.0

VP2-0066-R 3.2 +/-20% 2.50 1.26 0.090 33.7 7.01 0.083 44.0

VPH3-0780-R

(10)

132 +/-30% 0.07 0.97 0.14 39.8 0.24 0.125 43.4

VP3-0780-R

(10)

63.2 +/-30% 0.10 1.47 0.061 27.7 0.24 0.058 43.4

VPH3-0138-R 23.3 +/-20% 0.41 0.97 0.14 39.8 1.36 0.125 43.4

VP3-0138-R 11.2 +/-20% 0.59 1.47 0.061 27.7 1.36 0.058 43.4

VPH3-0084-R 14.2 +/-20% 0.67 0.97 0.14 39.8 2.23 0.125 43.4

VP3-0084-R 6.8 +/-20% 0.97 1.47 0.061 27.7 2.23 0.058 43.4

VPH3-0055-R 9.3 +/-20% 1.02 0.97 0.14 39.8 3.38 0.125 43.4

VP3-0055-R 4.5 +/-20% 1.46 1.47 0.061 27.7 3.38 0.058 43.4

VPH3-0047-R 7.94 +/-20% 1.19 0.97 0.14 39.8 4.00 0.125 43.4

VP3-0047-R 3.8 +/-20% 1.73 1.47 0.061 27.7 4.00 0.058 43.4

RoHS

2002/95/EC

Summary of content (8 pages)

PAGE 1
VERSA-PAC® Inductors and Transformers (Surface Mount) Description RoHS 2002/95/EC • Six winding, surface mount devices that offer more than 500 usable inductor or transformer configurations • High power density and low profile • Low radiated noise and tightly coupled windings • Power range from 1 Watt – 70 Watts • Frequency range to over 1MHz • 500 VAC Isolation • Ferrite core material Applications • Inductors: buck, boost, coupled, choke, filter, resonant, noise filtering, differential, forward, common mod
PAGE 2
VERSA-PAC® Inductors and Transformers (Surface Mount) Part (1) Number VPH4-0860-R(10) VP4-0860-R(10) VPH4-0140-R VP4-0140-R VPH4-0075-R VP4-0075-R VPH4-0060-R VP4-0060-R VPH4-0047-R VP4-0047-R VPH5-1200-R(10) VP5-1200-R(10) VPH5-0155-R VP5-0155-R VPH5-0083-R VP5-0083-R VPH5-0067-R VP5-0067-R VPH5-0053-R VP5-0053-R L(BASE) µH (NOM)(2) 159.65 +/-30% 87.0 +/-30% 23.7 +/-20% 11.3 +/-20% 12.7 +/-20% 6.1 +/-20% 10.1 +/-20% 4.9 +/-20% 7.94 +/-20% 3.8 +/-20% 173 +/-30% 76.8 +/-30% 22.3 +/-20% 9.
PAGE 3
VERSA-PAC® Inductors and Transformers (Surface Mount) Mechanical Diagrams VP1 and VPH1 RECOMMENDED PCB LAYOUT R N TOP VIEW W WHITE DOT PIN #1 LOGO (OPTIONAL) 1 M 12 1 VPH_-_ _ _ _ D (12 PLCS) A J 6 K (12PLCS) P (10PLCS) 12 NOTES COMPONENT SIDE 0 (10PLCS) 7 6 1) Tolerances A - I are ± 0.25 mm unless specified otherwise. 2) Tolerances J - P are +/- 0.1 mm unless specified otherwise.
PAGE 4
VERSA-PAC® Inductors and Transformers (Surface Mount) Mechanical Diagrams VP3 and VPH3 M L TOP VIEW WHITE DOT PIN #1 1 D 12 1 D (12 PLCS) I J (12PLCS) COMPONENT SIDE VPH_-_ _ _ _ A LOGO (OPTIONAL) N (10PLCS) 6 7 K (12PLCS) 6 O (10PLCS) 12 NOTES 6 7 1) Tolerances A - I are ± 0.25 mm unless specified otherwise. 2) Tolerances J - P are +/- 0.1 mm unless specified otherwise.
PAGE 5
VERSA-PAC® Inductors and Transformers (Surface Mount) Mechanical Diagrams VP5 and VPH5 M L TOP VIEW WHITE DOT PIN #1 1 D 12 1 D (12 PLCS) I J (12PLCS) COMPONENT SIDE VPH_-_ _ _ _ A LOGO (OPTIONAL) 6 N (10PLCS) 7 K (12PLCS) 6 O (10PLCS) 12 NOTES 6 7 1) Tolerances A - I are ± 0.25 mm unless specified otherwise. 2) Tolerances J - P are +/- 0.1 mm unless specified otherwise.
PAGE 6
VERSA-PAC® Inductors and Transformers (Surface Mount) HOW TO USE MULTIPLE WINDINGS Discrete inductors combine like resistors, when connected in series or parallel. For example, inductors in series add and inductors in parallel reduce in a way similar to Ohm’s Law. LSeries = L1 + L2 + L3...Ln LParallel = 1/ [1/L1 + 1/ L2 + 1/ L3....1/Ln] Windings on the same magnetic core behave differently. Two windings in series result in four times the inductance of a single winding.
PAGE 7
VERSA-PAC® Inductors and Transformers (Surface Mount) HOW TO PIN-CONFIGURE VERSA-PAC ® Each VERSA-PAC can be configured in a variety of ways by simply connecting pins together on the Printed Circuit Board (PCB). As shown below, the connections on the PCB are equal to the pin configuration statement shown at the bottom of the schematic symbol. Connecting a number of windings in parallel will increase the current carrying capability, while connecting in series will multiply the inductance.
PAGE 8
VERSA-PAC® Inductors and Transformers (Surface Mount) VERSA-PAC ® Performance Characteristics Bipolar (Push-Pull) Power vs Frequency Unipolar (Flyback) Power vs Frequency 40.0 70.0 35.0 60.0 30.0 VP 5 50.0 VP 5 Watts 40.0 Watts 25.0 30.0 20.0 VP 4 15.0 VP 4 20.0 VP 3 10.0 VP 3 VP 2 10.0 5.0 VP 2 VP 1 0.0 100 200 300 400 VP 1 0.0 100 500 200 300 400 500 Frequency, kHz Frequency, kHz These curves represent typical power handling capability.