Adjustable Frequency Drives M-Max 2.1 NFX9000 Drives Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 V6-T2-14 SVX9000 Open Drives Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.1 2 Adjustable Frequency Drives NFX9000 Drives Contents NFX9000 Drives Description 2 Page NFX9000 Drives Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustable Frequency Drives NFX9000 Drives 2.1 Catalog Number Selection 2 NFX9000 Drives 2 NFX 001 A 0 - 2 Base Catalog Number Enclosure 0 = IP20 Horsepower F25 = 1/4 hp F50 = 1/2 hp 001 = 1 hp 002 = 2 hp 2 2 Voltage 1 = 115 Vac 2 = 240 Vac 2 2 2 Series A 2 2 Product Selection NFX9000 2 NFX9000 Basic Controller IP20 Description hp 1 Volts 2 Input Ampere Single-/ThreePhase Rating 1/4 90–130 6.0/— 1.6 NFXF25A0-1 9.0/— 2.5 NFXF50A0-1 4.9/— 1.
2.1 2 Adjustable Frequency Drives NFX9000 Drives Technical Data and Specifications 2 General Specifications 2 NFX9000 Drives 2 Output Ratings Set Up Adjustments, Performance Features, Operator Control and External Interface Keypad Description Specification 2 Horsepower 90V–132V: 1/4–1/2 hp 200–240V: 1/2–2 hp 2 Frequency range 0.1–400 Hz Overload rating 150% for 60 seconds 2 Frequency resolution Digital: 0.1 Hz Frequency accuracy Digital: ±0.01% of max. frequency Analog: ±0.2% of max.
Adjustable Frequency Drives NFX9000 Drives 2.
2.1 2 Adjustable Frequency Drives NFX9000 Drives Basic Wiring Diagram 2 2 2 R/L1 R/L1 U/T1 S/L2 S/L2 V/T2 IM 3-Phase T/L3 T/L3 W/T3 Motor 2 2 2 2 2 +18V Factory Default Settings 2 Forward/Stop 2 DI1 Reverse/Stop DI2 Reset DI3 Multi-Step 1 DI4 2 2 2 4.7 KW 4.7 KW 4.7 KW 4.7 KW Common Signal 2 2 +18V 6 1 RS-485 Communication Port Power Supply for Potentiometer +10V 10 mA (Max.) Master Freq.
Adjustable Frequency Drives NFX9000 Drives 2.1 Dimensions Approximate Dimensions in Inches (mm) 2 1/4 to 2 hp Drive 2 2 0.20 (5.0) Dia. 2.68 (68.0) 2.20 (56.0) 2 R/L1 S/L2 T/L3 2 STOP RUN FWD REV 2 MODE RESET RUN STOP NFX9000 MIN. MAX. 0.5 HP 230V ! 2 ENTER 2 2 4.72 5.20 (120.0) (132.0) 1 PHASE 2 WARNING 2 2 RA RC +10V AVI D1 D2 D3 D4 GND RS-485 2 2 U/T1 V/T2W/T3 2 2 2 RS-485 2 2 2 5.04 4.86 (128.1) (123.
2.2 2 Adjustable Frequency Drives M-Max Series Adjustable Frequency AC Drives M-Max Series Drives for Machinery Applications Contents Description 2 Page M-Max Series Adjustable Frequency AC Drive Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Adjustable Frequency Drives M-Max Series Adjustable Frequency AC Drives Catalog Number Selection 2 MMX 1 1 AA 1D1 F 0 – 0 Description MMX = Base catalog number Phase 1 = Single-phase 3 = Three-phase 2 Enclosure Class 0 = NEMA 0 or IP20 Voltage 1 = 120V 4 = 480V 2 = 230V 5 = 575V Software Designation Series AA Output Current 1D6 = 1.
2.2 2 2 2 2 2 2 2 Adjustable Frequency Drives M-Max Series Adjustable Frequency AC Drives Accessories M-Max Copy/Paste Module Description Catalog Number Module is plugged onto the front of the drive to provide: upload/download of all parameters, MMX-COM-PC direct link to a PC via USB interface for parameter assignment via MaxConnect software, and copying of parameters for a series of devices or when exchanging devices.
Adjustable Frequency Drives M-Max Series Adjustable Frequency AC Drives 2.2 Technical Data and Specifications 2 Ratings Specifications M-Max Basic Controller IP20 Standard Ratings M-Max Series Drives Description Description Specification Protections 2 Specification 2 2 Input Ratings Overcurrent protection Trip limit 4.
2.2 Adjustable Frequency Drives M-Max Series Adjustable Frequency AC Drives 2 Standards 2 I/O Specifications ● Digital inputs DI1–DI6 are freely programmable.
Adjustable Frequency Drives M-Max Series Adjustable Frequency AC Drives 2.2 Dimensions Approximate Dimensions in Inches (mm) 2 M-Max Drives 2 W2 2 D2 W3 2 2 2 H1 H2 H3 2 2 2 2 2 D1 W1 Weight Lbs (kg) 2 0.27 (7.0) 1.213 (0.550) 2 4.00 (101.5) 0.27 (7.0) 1.543 (0.699) 2 4.27 (108.5) 0.27 (7.0) 2.183 (0.990) 2 Frame Type H1 H2 H3 W1 W2 W3 D1 D2 FS1 6.16 (156.5) 5.79 (147.0) 5.40 (137.3) 2.58 (65.5) 1.49 (37.8) 0.17 (4.5) 3.88 (98.5) FS2 7.68 (195.0) 7.20 (183.
2.3 2 Adjustable Frequency Drives SVX9000 Drives Contents SVX9000 Drives Description 2 Page SVX9000 Drives SVX9000 Open Drives . . . . . . . . . . . . . . . . . . . SVX9000 Enclosed Drives . . . . . . . . . . . . . . . . SVX9000 VFD Pump Panels . . . . . . . . . . . . . . .
Adjustable Frequency Drives SVX9000 Drives Product Selection Guide Features Controller Selection Controller Features The basic requirement of controller selection is to match the output current, voltage and frequency capabilities of the controller with the requirements of the connected motor.
2.3 2 2 2 2 2 2 2 2 2 2 2 2 Adjustable Frequency Drives SVX9000 Drives Motor Protection DV/DT and Peak Motor Voltage Solutions Today’s AFD products offer significantly improved performance, but at the potential cost of motor insulation stress. The fast switching time of the IGBT devices used in newer AFDs can cause a transmission line effect in the output power leads to the motor, leading to possibly damaging voltage levels.
Adjustable Frequency Drives SVX9000 Drives 2.3 Contents SVX9000 Open Drives Description Page SVX9000 Open Drives Standards and Certifications . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement Parts . . . . . . . . . . . . . . . . . . . . . .
2.
Adjustable Frequency Drives SVX9000 Drives 2.3 Product Selection 2 230V SVX9000 Drives SVX9000 Open Drives 2 208–240V, NEMA Type 1/IP21 Drives Frame Size Delivery Code hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number FR4 W 3/4 3.7 1 4.8 SVXF07A1-2A1B1 FR5 FR6 FR7 FR8 FR9 W W W W W 1 4.8 1-1/2 6.6 SVX001A1-2A1B1 1-1/2 6.6 2 7.8 SVXF15A1-2A1B1 2 7.8 3 11 SVX002A1-2A1B1 3 11 — 12.5 SVX003A1-2A1B1 — 12.5 5 17.5 SVX004A1-2A1B1 5 17.
2.3 Adjustable Frequency Drives SVX9000 Drives 2 480V SVX9000 Drives 2 SVX9000 Open Drives 2 380–500V, NEMA Type 1/IP21 Drives Frame Size Delivery Code FR4 W hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number 1 2.2 1-1/2 3.3 SVX001A1-4A1B1 2 1-1/2 3.3 2 4.3 SVXF15A1-4A1B1 4.3 3 5.6 SVX002A1-4A1B1 2 2 3 5.6 5 7.6 SVX003A1-4A1B1 5 7.
Adjustable Frequency Drives SVX9000 Drives SVX9000 Open Drives 2.
2.3 2 SVX9000 Open Drives 2 Adjustable Frequency Drives SVX9000 Drives 525–690V, NEMA Type 12/IP54 Drives Frame Size Delivery Code FR6 F1 hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number 2 3.3 3 4.5 SVX002A2-5A4N1 2 3 4.5 — 5.5 SVX003A2-5A4N1 2 — 5.5 5 7.5 SVX004A2-5A4N1 5 7.5 7-1/2 10 SVX005A2-5A4N1 2 7-1/2 10 10 13.5 SVX007A2-5A4N1 10 13.
2.3 Adjustable Frequency Drives SVX9000 Drives Accessories 2 Demo Drive and Power Supply 2 Demo Drive and Power Supply Description Catalog Number 9000X demo drive 9000XDEMO Hand-held 24V auxiliary power supply—Used to supply power to the control module in order to perform keypad programming before the drive is connected to line voltage 9000XAUX24V NEMA Type 12/IP54 Conversion Kit The NEMA Type 12/IP54 kit option is used to convert a NEMA Type 1/IP21 to a NEMA Type 12/IP54 drive.
2.3 2 2 2 2 2 SVX9000 Drives Options 9000X Series Option Board Kits The 9000X Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards. The 9000X Series factory installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
Adjustable Frequency Drives SVX9000 Drives Modbus RTU Network Communications The Modbus Network Card OPTC2 is used for connecting the 9000X Drive as a slave on a Modbus network. The interface is connected by a 9-pin DSUB connector (female) and the baud rate ranges from 300 to 19200 baud. Other communication parameters include an address range from 1 to 247; a parity of None, Odd or Even; and the stop bit is 1.
2.3 2 2 2 2 2 2 Adjustable Frequency Drives SVX9000 Drives Control Panel Options Factory Options Description Factory Installed Field Installed Option Code NEMA Type 1/IP21 Catalog Number Local/Remote Keypad SVX9000 Control Panel—This option is standard on all drives and A consists of an RS-232 connection, backlit alphanumeric LCD display with nine indicators for the RUN status and two indicators for the control source.
Adjustable Frequency Drives SVX9000 Drives 2.3 Replacement Parts 2 SVX9000 Drives Spare Units 2 208–690V, Frames 4–12 Description Catalog Number Control unit–Includes the control board, blue base housing, installed SVX9000 software program and blue flip cover. Does not include any OPT boards or keypad. See Page V6-T2-24 for standard and option boards and keypad.
2.
Adjustable Frequency Drives SVX9000 Drives 2.
2.
Adjustable Frequency Drives SVX9000 Drives 2.
2.
Adjustable Frequency Drives SVX9000 Drives 2.
2.
2.3 Adjustable Frequency Drives SVX9000 Drives Dimensions Approximate Dimensions in Inches (mm) 2 9000X Open Drives 2 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, FR4, FR5 and FR6 W1 W2 D1 2 R2 2 R1 EATON 2 2 2 H1 H3 2 H2 2 2 2 R2 2 2 2 2 Knockouts 2 D3 2 D2 2 hp (IH) H1 H2 H3 D1 D2 D3 W1 W2 R1 Dia. R2 Dia. Weight Lbs (kg) Knockouts at Inches (mm) N1 (O.D.) 2 230V 3/4–3 11.5 (292) 7.5 (190) 3.0 (77) 4.9 (126) 5.0 (128) 3.9 (100) 0.3 (7) 11.0 (5) 3 @ 1.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54 with Flange Kit, FR4, FR5 and FR6 2 2 W2 2 Dia. A 2 H2 H1 2 W1 2 2 2 H4 D1 2 2 H5 D2 2 2 H3 Dia. B H7 2 2 2 W5 Flange Opening FR4 to FR6 H8 H6 W4 W3 2 2 2 FR4, FR5 and FR6 with Flange Kit 2 W1 2 5.0 (128) 2 5.6 (143) 2 2 2 2 H9 W2 H1 H2 H3 H4 H5 D1 D2 Dia. A 4.5 (113) 13.3 (337) 12.8 (325) 12.9 (327) 1.2 (30) 0.9 (22) 7.5 (190) 3.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, FR7 2 H1 H2 2 2 2 W2 W1 2 2 R2 R1 2 R2 2 2 Knockouts 2 H3 2 D2 2 2 D1 D3 2 2 Voltage hp (IH) H1 H2 H3 D1 D2 D3 W1 W2 R1 Dia. R2 Dia. Weight Lbs (kg) Knockouts at Inches (mm) N1 (O.D.) 2 230V 20–30 24.8 (630) 24.2 (614) 23.2 (590) 10.1 (257) 3.0 (77) 7.3 (184) 9.3 (237) 7.5 (190) 0.7 (18) 0.4 (9) 77.2 (35) 3 at 1.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54, FR8 H1 H2 2 2 2 2 W1 W2 2 2 2 2 2 R2 R1 H3 2 2 2 2 D1 2 2 2 2 2 Voltage hp (IH) D1 H1 H2 H3 W1 W2 R1 Dia. R2 Dia. Weight Lbs (kg) 2 230V 40–60 13.5 (344) 30.1 (764) 28.8 (732) 28.4 (721) 11.5 (291) 10 (255) 0.7 (18) 0.4 (9) 127 (58) 480V 75–125 2 575V 50–75 2 2 2 2 2 2 2 2 V6-T2-38 Volume 6—Solid-State Motor Control CA08100007E—June 2012 www.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, with Flange Kit, FR7 and FR8 H6 H4 H4 H5 2 Dia. A 2 2 2 W4 W2 2 2 2 H2 H1 W3 W1 H7 2 2 2 2 D1 2 D2 2 2 H3 H12 H9 H9 H10 H11 2 2 Flange Opening FR7/FR8 W5 W6 2 W7 Dia. B 2 H8 H13 W1 2 W3 W4 H1 H2 H3 H4 H5 H6 H7 D1 D2 Dia. A 6.8 (175) 10.6 (270) 10.0 (253) 24.9 (652) 24.8 (632) 24.8 (630) 7.4 (189) 7.4 (189) 0.9 (23) 0.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54, FR9 H1 H2 2 2 2 W2 W1 2 2 2 2 R1 R2 R2 2 2 H3 2 2 2 D2 D1 2 2 2 2 Voltage hp (IH) H1 H2 H3 D1 D2 W1 W2 R1 Dia. R2 Dia. Weight Lbs (kg) 230V 75–100 45.3 (1150) 44.1 (1120) 42.4 (1076) 13.4 (340) 14.3 (362) 18.9 (480) 15.7 (400) 0.8 (20) 0.4 (9) 321.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54 FR9, continued H6 H4 H3 2 W4 W5 2 W2 W3 W1 2 2 PE W5 B- B+ /R+ R- 2 2 H2 H5 2 D3 2 H1 Dia. 2 2 D1 2 D2 2 W1 W2 W3 W4 W5 H1 H2 18.9 (480) 15.7 (400) 6.5 (165) 0.4 (9) 2.1 (54) 45.3 (1150) 44.1 (1120) H3 H4 H5 H6 1 D1 28.3 (721) 8.0 (205) 0.6 (16) 7.4 (188) 14.2 (361.5) 13.4 (340) D2 D3 Dia. 11.2 (285) 0.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54, FR9 with Flange Kit H7 2 2 W5 2 W1 2 2 2 2 Dia. 2 2 D1 D2 2 2 D3 2 2 2 H4 H4 H2 H5 H3 H3 H3 H5 2 2 2 W4 Flange Opening FR9 W3 W2 2 W4 2 2 2 2 H1 H6 .20 (5) Dia. W1 W2 W3 W4 W5 H1 20.9 (530) 20.0 (510) 19.1 (485) 7.9 (200) 0.2 (5.5) 51.7 (1312) 45.3 (1150) 16.5 (420) H2 H3 H4 H5 H6 H7 D1 D2 D3 Dia. 3.9 (100) 1.4 (35) 0.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, FR10 Freestanding W7 W4 2 W5 W6 W6 2 W4 2 2 Dia. 3 Dia. 1 Dia. 2 2 D6 D7 D3 D2 D5 2 D4 W2 W3 W1 W3 W3 W3 2 W2 2 D1 2 2 2 2 2 2 2 2 H1 H2 2 2 2 Operator (Shown with Optional Disconnect) 2 2 H3 2 2 W1 W2 W3 W4 W5 W6 W7 H1 H2 H3 D1 23.43 (595) 2.46 (62.5) 4.53 (115) 0.79 (20) 5.95 (151) 2.95 (75) 30.11 (79) 79.45 (2018) 74.
2.3 2 2 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) FR10 Open Chassis 1 H3 H4 H5 W3 2 2 W2 W1 W5 2 2 2 2 H7 W4 H6 H2 H1 2 2 2 2 2 2 D3 D4 D2 D1 2 2 2 2 2 2 Voltage hp (IH) W1 W2 W3 W4 W5 H1 H2 H3 H4 H5 H6 H7 D1 D2 D3 D4 Weight Lbs (kg) 480V 250–350 575V 200–300 19.7 (500) 16.7 (425) 1.2 (30) 2.6 (67) 12.8 (325) 45.9 (1165) 44.1 (1121) 34.6 (879) 33.5 (850) 0.7 (17) 24.7 (627) 10.8 (275) 19.9 (506) 17.9 (455) 16.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21, FR11 Freestanding Drive W5 2 W8 W6 W6 W6 W7 W7 W6 W6 W6 W4 2 2 2 Dia. 3 Dia. 1 D3 Dia. 2 2 D5 D2 2 D4 W2 W3 W1 W3 W3 W3 2 W2 2 D1 2 2 2 2 2 2 2 2 H1 H2 2 2 Operator (Shown with Optional Disconnect) 2 2 2 H3 2 2 Voltage hp (IH) 480 W1 400–550 31.26 (794) W2 W3 W4 W5 W6 W7 W8 H1 H2 H3 D1 2.40 (61) 6.50 (165) 0.79 (20) 3.43 (87) 2.95 (75) 2.52 (64) 1.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) FR11 Open Chassis H2 2 W3 W3 W2 W2 W2 W2 2 2 2 2 2 2 Shown without terminal cover 2 2 H1 2 2 2 2 W1 2 2 2 2 2 2 2 D1 D2 2 2 2 2 Voltage hp (IH) W1 W2 W3 H1 H2 D1 D2 Weight Lbs (kg) 480V 400–550 27.9 (709) 8.86 (225) 2.6 (67) 45.5 (1155) 33.5 (850) 19.8 (503) 18.4 (468) 833 (378) 575V 400–500 2 2 2 2 V6-T2-46 Volume 6—Solid-State Motor Control CA08100007E—June 2012 www.eaton.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 FR13, Open Chassis Inverter W3 2 D6 2 Dia. 4 2 D8 2 D7 D5 W4 W4 W4 W4 W4 Dia. 1 D1 D2 2 D6 2 W1 2 2 2 H3 H1 2 H4 2 2 2 H2 Dia. 2 Dia. 3 W2 W2 W2 W2 D4 D4 2 H5 2 2 2 Dia. 3 D3 W1 W2 W3 W4 W5 H1 H2 H3 H4 H5 27.87 (708) 5.91 (150) 26.65 (677) 4.57 (116) 3.35 (85) 41.54 2.46 39.86 41.34 0.79 (1055) (62.5) (1012.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) FR13, Open Chassis Converter Dia. 3 W3 2 D9 2 D8 2 D7 2 2 D6 Dia. 1 W4 W4 W4 D1 D2 W1 2 2 2 2 H4 H1 H3 2 2 2 2 H2 2 W2 D4 W2 D5 D5 2 H5 Dia. 2 2 2 Dia. 2 2 D3 2 2 2 H2 H3 H4 H5 W5 W1 W2 W3 W4 W5 H1 D1 18.74 (476) 5.91 (150) 17.52 (445) 4.57 (116) 3.35 (85) 41.54 2.46 39.86 41.34 0.69 14.69 (1055) (62.5) (1012.5) (1050) (17.5) (373) D2 D3 0.51 (13) 0.73 6.42 (18.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 FR13, Open Chassis Converter—900/1000 hp 480V Dia. 4 2 D9 2 D8 2 D7 2 W3 2 D6 Dia. 1 W4 W4 W4 W4 W4 D1 W1 D2 2 2 2 2 H1 H3 H4 2 2 2 2 2 H2 Dia. 2 W2 W2 W2 D4 W2 D5 D5 H5 Dia. 3 2 2 2 2 D3 W1 W2 W3 W4 W5 H1 H2 H3 H4 H5 D1 27.87 (708) 5.91 (150) 26.65 (677) 4.57 (116) 3.35 (85) 41.54 2.46 39.86 41.34 0.69 14.69 (1055) (62.5) (1012.5) (1050) (17.
2.
Adjustable Frequency Drives SVX9000 Drives 2.3 Approximate Dimensions in Inches (mm) 2 CHK0400 2 2 2 .24 (6) 4.72 (120) 2 2 4.72 (120) 2 9.37 (238) 1.54 (39) 2 13.79 (350) 1 1 2 1 2 13.94 (354) 2.64 (67) .75 (19) .59 (15) 2 16.58 15.08 (421) (383) 1.18 (30) .59 (15) 3 3 3 2 2 2 5.51 (140) 2 2 2 5.90 (150) 10.83 (275) 10.30 (262) 2 2 CHK0261 2 2 2 .24 (6) 4.72 (120) 2 4.72 (120) 2 13.79 (350) 2 8.11 (206) 1.54 (39) 2 1 1 2 1 2 .59 (15) 1.18 (30) .87 (22) .
2.3 2 Adjustable Frequency Drives SVX9000 Drives Contents SVX9000 Enclosed Drives Description 2 Page SVX9000 Open Drives . . . . . . . . . . . . . . . . . . . . . SVX9000 Enclosed Drives Product Identification . . . . . . . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . .
Adjustable Frequency Drives SVX9000 Drives 2.
2.
Adjustable Frequency Drives SVX9000 Drives 2.3 Product Selection 2 When Ordering ● Select a base catalog number that meets the application requirements— nominal horsepower, voltage and enclosure rating (the enclosed drive’s continuous output amp rating should be equal to or greater than the motor’s full load amp rating). The base enclosed package includes a standard drive, door mounted local/remote keypad and enclosure.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives 230V Drives SVX9000 Enclosed Drives Input Base Drives NEMA Type 1/IP21 Enclosure Size 1 2 hp Frame Current (A) Size NEMA Type 12/IP54 Base Catalog Number 2 Frame Size Base Catalog Number 2 SVXF0712EA 4 SVXF0722EA High Overload Drive and Enclosure 2 0 3/4 3.7 2 1 4.8 SVX00112EA SVX00122EA 1-1/2 6.6 SVXF1512EA SVXF1522EA 2 2 7.8 SVX00212EA SVX00222EA 3 11 SVX00312EA SVX00322EA 5 17.
Adjustable Frequency Drives SVX9000 Drives 2.3 480V Drives SVX9000 Enclosed Drives 2 Input Base Drives NEMA Type 1/IP21 Enclosure Size 1 hp Frame Current (A) Size 2 NEMA Type 12/IP54 Base Catalog Number 2 Frame Size Base Catalog Number 2 SVX00114EA 4 SVX00124EA 2 High Overload Drive and Enclosure 0 1 2 3 1 2.2 1-1/2 3.3 SVXF1514EA SVXF1524EA 2 4.3 SVX00214EA SVX00224EA 3 5.6 SVX00314EA SVX00324EA 5 7.
2.3 2 SVX9000 Enclosed Drives Adjustable Frequency Drives SVX9000 Drives Input Base Drives, continued NEMA Type 1/IP21 2 Enclosure Size 1 2 Low Overload Drive and Enclosure 0 hp Frame Current (A) Size Frame Size Base Catalog Number 2 SVXF1514BA 4 SVXF1524BA 1-1/2 3.3 2 2 4.3 SVX00214BA SVX00224BA 2 3 5.6 SVX00314BA SVX00324BA 5 7.
2.3 Adjustable Frequency Drives SVX9000 Drives Options 2 9000X Series Option Board Kits The 9000X Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards. 2 2 The 9000X Series factory installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
2.3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Adjustable Frequency Drives SVX9000 Drives Modbus RTU Network Communications The Modbus Network Card OPTC2 is used for connecting the 9000X Drive as a slave on a Modbus network. The interface is connected by a 9-pin DSUB connector (female) and the baud rate ranges from 300 to 19200 baud. Other communication parameters include an address range from 1 to 247; a parity of None, Odd or Even; and the stop bit is 1.
Adjustable Frequency Drives SVX9000 Drives 2.3 Control/Communication Option Descriptions 2 For availability, see Product Selection for base drive voltage required. 2 Available Control/Communications Options 2 Option Description Option Type K1 Door-Mounted Speed Potentiometer—Provides the SVX9000 with the ability to adjust the frequency reference using a door-mounted potentiometer. This option uses the 10 Vdc reference to generate a 0–10V signal at the analog voltage input signal terminal.
2.3 Adjustable Frequency Drives SVX9000 Drives 2 For availability, see Product Selection for base drive voltage required. 2 Available Control/Communications Options, continued 2 2 Option Description Option Type PI Dual Overload Relays—This option is recommended when a single drive is operating two motors and overload current protection is needed for each of the motors.
2.3 Adjustable Frequency Drives SVX9000 Drives Enclosed Drive Options 2 Brake Chopper Options The brake chopper circuit option is used for applications that require dynamic braking. Dynamic braking resistors are not included with drive purchase. Consult the factory for dynamic braking resistors which are supplied separately. Resistors are not UL Listed. 2 For brake chopper circuit selection and adder—NEMA Type 1/IP21, NEMA Type 12/ IP54, consult the factory.
2.
Adjustable Frequency Drives SVX9000 Drives 2.
2.
2.3 Adjustable Frequency Drives SVX9000 Drives Dimensions Approximate Dimensions in Inches (mm) 2 9000X Enclosed Drives 2 2 Size 0 1.50 (38.1) Lifting Holes 4 Places K For Cable Entry K H B U 2 L 2 S F 2 T Top View For Cable Entry 2 P 2 W 2 R C 2 V J D A 0.44 (11.2) Mounting Holes 4 Places 2 V NEMA Type 1/IP21, NEMA Type 12/IP54 NEMA Type 12/IP54 Includes Cover Plates Over Louvers Bottom View 2 For reference only, dimensions are subject to change.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) Size 1 2.50 (63.5) Lifting Holes 4 Places 2 2.50 (63.5) Lifting Holes 4 Places K J D K AA J 2 2 2 H B 2 C D A 0.44 (11.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 Size 2 2.50 (63.5) Lifting Holes 2 Places 2.50 (63.5) Lifting Holes AA 2 Places J 2 D 2 J K K 2.50 (63.5) Lifting Holes AA 2 Places 2 D J K H B 2 H B F 2 PP 2 NN 2 H XB CC 2 C D A 0.44 (11.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) Size 3 0.50 (12.7) Lifting Eyes 2 Places 2 J K M 2 V For Cable Entry 2 U L 2 S T 2 2 Top View H B RR 0.44 (11.2) Mounting Holes 6 Places R 2 2 2 2 2 TT UU SS C 2 2 N G 2 2 For Cable Entry F 2 2 P G1 D1 E1 A W D E VV Bottom View NEMA Type 1/IP21, NEMA Type 12/IP54 NEMA Type 12/IP54 Includes Cover Plates Over Louvers For reference only, dimensions are subject to change.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 Size 4 2 0.50 (12.7) Lifting Eyes 2 Places 2 K J M P 2 V For Cable Entry 2 U 2 L S 2 T Top View H B 2 RR 0.44 (11.2) Mounting Holes 6 Places R 2 For Cable Entry 2 N F 2 G SS TT C G1 D1 E1 A 2 D E NEMA Type 1/IP21, NEMA Type 12/IP54 NEMA Type 12/IP54 Includes Cover Plates Over Louvers 2 Bottom View 2 For reference only, dimensions are subject to change.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) Size 5 J 2 2 2 2 Lifting Eyes (2 Places) 2 RR 2 2 N For Cable Entry T 2 H S 2 M B 2 P Top View A Front View NEMA Type 1/IP21 2 L 0.56 (14.2) Dia. Mounting Holes (4 Places) 2 2 F SS G C 2 D D1 Side View Bottom View 2 2 IL hp 2 208/230V 75 100 2 480V 200 250 2 2 Front View NEMA Type 12/IP54 2 For reference only, dimensions are subject to change.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 Size 5-1P 2 J 2 2 2 Lifting Eyes (2 Places) 2 RR 2 For Cable Entry N S H 2 L T B 2 Door Clearance P M Top View A Front View NEMA Type 1/IP21 0.56 (14.2) Dia.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) Size 5-2P J 2 2 2 Lifting Eyes (2 Places) 2 RR 2 For Cable Entry 2 2 2 2 N T S H B L P Top View A 2 M Door Clearance Front View NEMA Type 1/IP21 0.56 (14.2) Dia.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 Size 6 2 2 T 2 S 2 Door Clearance Top View 2 2 J 2 Keypad 2 Flanged Disconnect Supplied with Circuit Breaker When Specified 2 Operator Elements When Specified, Mounted on These Panels RR B 2 2 Key-Locking Handle H 2 2 C Ventilating Slots 2 Quarter Turn Latch (2 Places) 2 2 A Side View 2 Front View L M 2 N IL hp 480V For Cable Entry F 300 350 400 P 2 0.56 (14.2) Dia.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) Size 8 2 2 For Top Cable Entry – (2 Places) T S R 2 2 Top View 2 J 2 2 2 2 2 2 RR H B 2 2 2 2 2 U C Side View 2 0.56 (14.2) Dia. Mounting Hole – (4 Places) 2 2 IL hp 300 350 400 480V 2 M L For Bottom Cable Entry F N G P 2 2 V A Front View D Bottom View D1 For reference only, dimensions are subject to change. See Page V6-T2-57, notes 3 and 5 for enclosure and option selection.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 Size 9 T S 2 U 2 R Access in Top – (2 Places) V 2 W 2 SS TT 90° Max. Door Opening 90° Max. Door Opening 2 UU 2 Top View 2 J Openings Filtered for NEMA Type 12/IP54 Design 2 Drive Circuit Breaker 2 2 2 Key-Locking Handle 2 RR 2 B 2 Access Plate – 4 Places 2 2 C Side View 2 A Front View M 2 Bottom Access L 0.56 (14.2) Dia.
2.3 2 Adjustable Frequency Drives SVX9000 Drives Contents SVX9000 VFD Pump Panels Description 2 Page SVX9000 Open Drives . . . . . . . . . . . . . . . . . . . . . SVX9000 Enclosed Drives . . . . . . . . . . . . . . . . . . . SVX9000 VFD Pump Panels Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . .
2.
2.3 Adjustable Frequency Drives SVX9000 Drives 2 Product Selection 2 2 When Ordering ● Select a base catalog number that meets the application requirements— nominal horsepower, voltage and enclosure rating (the enclosed drive’s continuous output amp rating should be equal to or 2 208V Drives 2 SVX9000 Enclosed Drives 2 2 greater than the motor’s full load amp rating). The base enclosed package includes a standard drive, door mounted local/remote keypad and enclosure.
Adjustable Frequency Drives SVX9000 Drives 2.
2.
Adjustable Frequency Drives SVX9000 Drives 2.
2.
2.3 Adjustable Frequency Drives SVX9000 Drives Options 2 9000X Series Option Board Kits 2 The 9000X Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards. 2 The 9000X Series factory installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
2.3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Adjustable Frequency Drives SVX9000 Drives Modbus RTU Network Communications The Modbus Network Card OPTC2 is used for connecting the 9000X Drive as a slave on a Modbus network. The interface is connected by a 9-pin DSUB connector (female) and the baud rate ranges from 300 to 19200 baud. Other communication parameters include an address range from 1 to 247; a parity of None, Odd or Even; and the stop bit is 1.
Adjustable Frequency Drives SVX9000 Drives 2.3 Control/Communication Option Descriptions 2 For availability, see Product Selection for base drive voltage required. 2 Available Control/Communications Options Option Description Option Type K1 Door-Mounted Speed Potentiometer—Provides the SVX9000 with the ability to adjust the frequency reference using a door-mounted potentiometer. This option uses the 10 Vdc reference to generate a 0–10V signal at the analog voltage input signal terminal.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives VFD Pump Panel Options Brake Chopper Options 1 208V and 230V: NEMA Type 12/IP54/3R, IH hp 3/4 to 100; IL hp 1 to 100 480V: NEMA Type 12/IP54/3R, IH hp 1 to 400; IL hp 1-1/2 to 400 208V, 230V and 480V Enclosure Options, Sizes A–D 2 Description Catalog Number Suffix 2 208V and 230V Control Options, 3/4–100 hp 2 Floor stand 22 in (558.
Adjustable Frequency Drives SVX9000 Drives 2.
2.
2.
2.3 2 Adjustable Frequency Drives SVX9000 Drives Dimensions Approximate Dimensions in Inches (mm) 2 SVX9000 Pump Application Drives 2 Enclosure Box A NEMA Type 12/IP54 2 4.00 (101.6) Minimum Free Air Space Required 2 3.00 (76.2) Minimum Air Space Required Both Sides 2 2 2 2 H1 H2 H 2 2 2 2 0.44 (11.2) Mounting Holes (4 Places) W1 W D1 D 2 2 2 2 2 2 2 2 Voltage AC hp (IH) hp (IL) Approx. Shipping Weight Lbs (kg) H H1 H2 W W1 D D1 29.00 (736.6) 27.00 (685.8) 25.35 (643.9) 16.
Adjustable Frequency Drives SVX9000 Drives 2.3 Approximate Dimensions in Inches (mm) 2 Enclosure Box B NEMA Type 12/IP54 2 4.00 (101.6) Minimum Free Air Space Required 2 3.00 (76.2) Minimum Air Space Required Both Sides 2 2 2 2 2 H H1 H2 2 2 2 2 2 0.44 (11.2) Mounting Holes (4 Places) W1 W 2 D1 D 2 2 2 2 2 2 hp (IH) hp (IL) 208V 15–25 20–30 230V 15–25 20–30 480V 30–60 40–75 Voltage AC H H1 H2 W W1 D D1 40.00 (1016.0) 38.00 (965.2) 36.35 (923.3) 20.92 (531.4) 19.
2.3 2 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Box C NEMA Type 12/IP54 0.44 (11.2) Mounting 4.00 (101.6) Minimum Holes Free Air Space Required (4 Places) 0.44 (11.2) Mounting Holes (4 Places) 3.00 (76.2) Minimum Air Space Required Both Sides W1 3.00 (76.2) Minimum Air Space Required Both Sides 4.00 (101.
Adjustable Frequency Drives SVX9000 Drives 2.3 Approximate Dimensions in Inches (mm) 2 Enclosure Box A NEMA Type 3R W 2 D 2 2 2 2 2 H 2 H1 H2 H3 2 2 2 2 W2 W1 W3 D2 D1 2 0.44 (11.2) Mounting Holes (4 Places) 2 2 2 2 2 2 2 Voltage AC hp (IH) hp (IL) H H1 H2 H3 W W1 W2 W3 D D1 D2 33.00 (838.2) 31.36 (796.5) 29.67 (753.6) 25.35 (643.9) 21.05 (534.7) 16.92 (429.8) 15.30 (388.6) 2.07 (52.6) 17.24 (437.9) 16.26 (413.0) 3.31 (840.1) Approx. Weight Lbs (kg) Approx.
2.3 2 2 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Box B NEMA Type 3R W D 2 2 2 2 2 2 2 H2 H H1 2 H3 2 2 2 2 2 2 W2 W1 W3 D1 D2 2 0.44 (11.2) Mounting Holes (4 Places) 2 2 2 2 2 2 2 2 2 Voltage AC hp (IH) hp (IL) H2 H3 W W1 W2 W3 D D1 D2 Approx. Weight Lbs (kg) 46.09 44.45 (1170.7) (1129.0) 42.77 (1086.4) 36.35 (923.3) 26.31 (668.3) 20.92 (531.4) 19.30 (490.2) 2.69 (68.3) 17.74 (450.6) 16.76 (425.7) 3.31 (840.
2.3 Adjustable Frequency Drives SVX9000 Drives Approximate Dimensions in Inches (mm) 2 Enclosure Box C NEMA Type 3R 0.44 (11.2) Mounting Holes (4 Places) W W W2 D 2 0.44 (11.2) Mounting Holes (4 Places) D 2 2 2 2 2 H1 H2 H3 2 H2 H3 H 2 H4 H5 2 2 2 W2 W1 W3 D2 2 D1 2 2 2 D1 W1 D2 2 2 2 Voltage AC hp (IH) hp (IL) H H1 Approx. Weight Lbs (kg) H2 H3 H4 H5 W W1 W2 W3 D D1 D2 58.09 56.45 (1475.5) (1433.8) 54.77 (1391.2) 48.35 (1228.1) 78.09 (1983.5) 77.64 (1972.
2.4 2 Adjustable Frequency Drives SPX9000 Drives Contents SPX9000 Drives Description 2 SPX9000 Drives Features and Benefits . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement Parts . . . . . . .
Adjustable Frequency Drives SPX9000 Drives 2.4 Features and Benefits ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Speed error <0.
2.
Adjustable Frequency Drives SPX9000 Drives 2.4 Product Selection 2 230V Drives 2 SPX9000 Open Drives 208–240V, NEMA Type 1/IP21 Drives Frame Size Delivery Code hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number FR4 FP 3/4 3.7 1 4.8 SPXF07A1-2A1B1 FR5 FR6 FR7 FR8 FR9 FP FP FP FP FP 1 4.8 1-1/2 6.6 SPX001A1-2A1B1 1-1/2 6.6 2 7.8 SPXF15A1-2A1B1 2 7.8 3 11 SPX002A1-2A1B1 3 11 — 12.5 SPX003A1-2A1B1 — 12.5 5 17.5 SPX004A1-2A1B1 5 17.
2.4 2 480V Drives 2 SPX9000 Open Drives Adjustable Frequency Drives SPX9000 Drives 380–500V, NEMA Type 1/IP21 Drives Frame Size 2 FR4 Delivery Code hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number W 1 2.2 1-1/2 3.3 SPX001A1-4A1B1 2 FP 1-1/2 3.3 2 4.3 SPXF15A1-4A1B1 2 4.3 3 5.6 SPX002A1-4A1B1 2 FP W 3 5.6 5 7.6 SPX003A1-4A1B1 W 5 7.
Adjustable Frequency Drives SPX9000 Drives SPX9000 Open Drives 2.4 380–500V, NEMA Type 12/IP54 Drives 2 Frame Size Delivery Code hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number FR4 W 1 2.2 1-1/2 3.3 SPX001A2-4A1B1 FP 1-1/2 3.3 2 4.3 SPXF15A2-4A1B1 FP 2 4.3 3 5.6 SPX002A2-4A1B1 FR5 FR6 FR7 FR8 FR9 W 3 5.6 5 7.6 SPX003A2-4A1B1 W 5 7.
2.4 2 575V Drives 2 SPX9000 Open Drives Adjustable Frequency Drives SPX9000 Drives 525–690V, NEMA Type 1/IP21 Drives Frame Size Delivery Code hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number FR6 W 2 3.3 3 4.5 SPX002A1-5A4N1 2 3 4.5 — 5.5 SPX003A1-5A4N1 5.5 5 7.5 SPX004A1-5A4N1 2 — 5 7.5 7-1/2 10 SPX005A1-5A4N1 2 7-1/2 10 10 13.5 SPX007A1-5A4N1 10 13.
Adjustable Frequency Drives SPX9000 Drives SPX9000 Open Drives 2.4 525–690V, NEMA Type 12/IP54 Drives 2 Frame Size Delivery Code hp (IH) Current (IH) hp (IL) Current (IL) Catalog Number FR6 F1 2 3.3 3 4.5 SPX002A2-5A4N1 3 4.5 — 5.5 SPX003A2-5A4N1 — 5.5 5 7.5 SPX004A2-5A4N1 5 7.5 7-1/2 10 SPX005A2-5A4N1 7-1/2 10 10 13.5 SPX007A2-5A4N1 10 13.
2.4 Adjustable Frequency Drives SPX9000 Drives 2 Accessories 2 Demo Drive and Power Supply 2 2 2 2 2 2 2 2 Demo Drive and Power Supply Description Catalog Number 9000X demo drive 9000XDEMO Hand-held 24V auxiliary power supply—Used to supply power to the control module in order to perform keypad programming before the drive is connected to line voltage 9000XAUX24V NEMA Type 12/IP54 Conversion Kit The NEMA Type 12/IP54 kit option is used to convert a NEMA Type 1/IP21 to a NEMA Type 12/IP54 drive.
2.4 Adjustable Frequency Drives SPX9000 Drives Options 2 9000X Series Option Board Kits 2 The 9000X Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards. 2 2 The 9000X Series factory installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
2.
Adjustable Frequency Drives SPX9000 Drives Modbus RTU Network Communications The Modbus Network Card OPTC2 is used for connecting the 9000X Drive as a slave on a Modbus network. The interface is connected by a 9-pin DSUB connector (female) and the baud rate ranges from 300 to 19200 baud. Other communication parameters include an address range from 1 to 247; a parity of None, Odd or Even; and the stop bit is 1.
2.4 2 2 2 Adjustable Frequency Drives SPX9000 Drives Control Panel Options Factory Options Description Factory Installed Field Installed Option Code NEMA Type 1/IP21 Catalog Number Local/Remote Keypad SVX9000 Control Panel—This option is standard on all drives and A consists of an RS-232 connection, backlit alphanumeric LCD display with nine indicators for the RUN status and two indicators for the control source.
Adjustable Frequency Drives SPX9000 Drives 2.4 Control/Communication Options 2 Available Control/Communications Options Option Description Option Type K2 Door-Mounted Speed Potentiometer with HOA Selector Switch—Provides the SPX9000 with the ability to start/stop and adjust the speed reference from door-mounted control devices or remotely from customer supplied inputs. In HAND position, the drive will start and the speed is controlled by the door-mounted speed potentiometer.
2.4 Adjustable Frequency Drives SPX9000 Drives 2 Replacement Parts 2 SPX9000 Drives Spare Units 208–690V, Frames 4–12 2 Description Catalog Number 2 Control unit–Includes the control board, blue base housing, installed SVX9000 software program and blue flip cover. Does not include any OPT boards or keypad. See Page V6-T2-107 for standard and option boards and keypad.
Adjustable Frequency Drives SPX9000 Drives 2.
2.
Adjustable Frequency Drives SPX9000 Drives 2.
2.
Adjustable Frequency Drives SPX9000 Drives 2.
2.
Adjustable Frequency Drives SPX9000 Drives 2.
2.4 Adjustable Frequency Drives SPX9000 Drives 2 Technical Data and Specifications 2 SPX9000 Drives 2 Input Ratings 2 Input voltage (Vin) +10%/–15% Input frequency (fin) 50/60 Hz (variation up to 45–66 Hz) 2 Connection to power Once per minute or less (typical operation) 2 Output Ratings 2 2 2 2 2 2 2 2 2 Description Specification High withstand rating Output reference voltage +10V +3%, max.
2.4 Adjustable Frequency Drives SPX9000 Drives Dimensions Approximate Dimensions in Inches (mm) 2 9000X Drives 2 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, FR4, FR5 and FR6 W1 W2 D1 R2 2 R1 2 2 EATON 2 2 H1 H3 2 H2 2 2 2 R2 2 2 2 2 Knockouts 2 D3 2 D2 2 Voltage Weight Lbs (kg) Knockouts at Inches (mm) N1 (O.D.) 0.3 (7) 11.0 (5) 3 at 10.1 (28) 0.5 (13) 0.3 (7) 17.9 (8) 2 at 1.5 (37) 1 at 10.1 (28) 0.6 (15.5) 0.4 (9) 40.
2.4 2 2 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54 with Flange Kit, FR4, FR5 and FR6 2 2 W2 2 Dia. A 2 H2 H1 2 W1 2 2 2 H4 D1 2 2 H5 D2 2 2 H3 Dia. B H7 2 2 2 W5 Flange Opening FR4 to FR6 H8 H6 W4 W3 2 2 2 FR4, FR5 and FR6 with Flange Kit 2 W1 2 5.0 (128) 2 5.6 (143) 2 2 2 2 H9 W2 H1 H2 H3 H4 H5 D1 D2 Dia. A 4.5 (113) 13.3 (337) 12.8 (325) 12.9 (327) 1.2 (30) 0.9 (22) 7.5 (190) 3.
2.4 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, FR7 2 H1 H2 2 2 2 W2 W1 2 2 R2 R1 2 R2 2 2 Knockouts 2 H3 2 D2 2 2 D1 D3 2 2 Voltage hp (IH) H1 H2 H3 D1 D2 D3 W1 W2 R1 Dia. R2 Dia. Weight Lbs (kg) Knockouts at Inches (mm) N1 (O.D.) 2 230V 20–30 24.8 (630) 24.2 (614) 23.2 (590) 10.1 (257) 3.0 (77) 7.3 (184) 9.3 (237) 7.5 (190) 0.7 (18) 0.4 (9) 77.2 (35) 3 at 1.
2.4 2 2 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54, FR8 H1 H2 2 2 2 2 W1 W2 2 2 2 2 2 R2 R1 H3 2 2 2 2 D1 2 2 2 2 2 Voltage hp (IH) D1 H1 H2 H3 W1 W2 R1 Dia. R2 Dia. Weight Lbs (kg) 2 230V 40–60 13.5 (344) 300.1 (764) 28.8 (732) 28.4 (721) 11.5 (291) 10 (255) 0.7 (18) 0.
2.4 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, with Flange Kit, FR7 and FR8 H6 H4 H4 H5 2 Dia. A 2 2 2 W4 W2 2 2 2 H2 H1 W3 W1 H7 2 2 2 2 D1 2 D2 2 2 H3 H12 H9 H9 H10 H11 2 2 Flange Opening FR7/FR8 W5 W6 2 W7 Dia. B 2 H8 H13 W1 2 W3 W4 H1 H2 H3 H4 H5 H6 H7 D1 D2 Dia. A 6.8 (175) 10.6 (270) 10.0 (253) 25.6 (652) 24.9 (632) 24.8 (630) 7.4 (189) 7.4 (189) 0.9 (23) 0.
2.4 2 2 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54, FR9 H1 H2 2 2 2 W2 W1 2 2 2 2 R1 R2 R2 2 2 H3 2 2 2 D2 D1 2 2 2 2 Voltage hp (IH) H1 H2 H3 D1 D2 W1 W2 R1 Dia. R2 Dia. Weight Lbs (kg) 230V 75–100 45.3 (1150) 44.1 (1120) 42.4 (1076) 13.4 (340) 14.3 (362) 18.9 (480) 15.7 (400) 0.8 (20) 0.
2.4 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, FR9, continued H6 H4 H3 2 W4 W5 2 W2 W3 W1 2 2 PE W5 B- B+ /R+ R- 2 2 H2 H5 2 D3 2 H1 Dia. 2 2 D1 2 D2 2 W1 W2 W3 W4 W5 H1 H2 18.9 (480) 15.7 (400) 6.5 (165) 0.4 (9) 2.1 (54) 45.3 (1150) 44.1 (1120) H3 H4 H5 H6 1 D1 28.3 (721) 8.0 (205) 0.6 (16) 7.4 (188) 14.2 (361.5) 13.4 (340) D2 D3 Dia. 11.2 (285) 0.
2.4 2 2 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) NEMA Type 1/IP21 and NEMA Type 12/IP54, FR9 with Flange Kit H7 2 2 W5 2 W1 2 2 2 2 Dia. 2 2 D1 D2 2 2 D3 2 2 2 H4 H4 H2 H5 H3 H3 H3 H5 2 2 2 W4 Flange Opening FR9 W3 W2 2 W4 2 2 2 2 H1 H6 .20 (5) Dia. W1 W2 W3 W4 W5 H1 20.9 (530) 20.0 (510) 19.1 (485) 7.9 (200) 0.2 (5.5) 51.7 (1312) 45.3 (1150) 16.5 (420) H2 H3 H4 H5 H6 H7 D1 D2 D3 Dia. 3.9 (100) 1.4 (35) 0.
2.4 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21 and NEMA Type 12/IP54, FR10 Freestanding W7 W4 2 W5 W6 W6 2 W4 2 2 Dia. 3 Dia. 1 Dia. 2 2 D6 D7 D3 D2 D5 2 D4 W2 W3 W1 W3 W3 W3 2 W2 2 D1 2 2 2 2 2 2 2 2 H1 H2 2 2 2 Operator (Shown with Optional Disconnect) 2 2 H3 2 2 hp Volts (IH) 480V 250–350 690V 200–300 W1 W2 23.43 2.46 (595) (62.5) W3 W4 W5 W6 W7 H1 H2 H3 D1 4.53 (115) 0.79 (20) 5.95 (151) 2.
2.4 2 2 2 2 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) FR10 Open Chassis 1 H3 H4 H5 W3 2 2 W2 W1 W5 2 2 2 2 H7 W4 H6 H2 H1 2 2 2 2 2 2 D3 D4 D2 D1 2 2 2 2 2 2 Voltage hp (IH) W1 W2 W3 W4 W5 H1 H2 H3 H4 H5 H6 H7 D1 D2 D3 D4 Weight Lbs (kg) 480V 250–350 575V 200–300 19.7 (500) 16.7 (425) 1.2 (30) 2.6 (67) 12.8 (325) 45.9 (1165) 44.1 (1121) 34.6 (879) 33.5 (850) 0.7 (17) 24.7 (627) 10.8 (275) 19.9 (506) 17.9 (455) 16.
2.4 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) 2 NEMA Type 1/IP21, FR11 Freestanding Drive W5 2 W8 W6 W6 W6 W7 W7 W6 W6 W6 W4 2 2 2 Dia. 3 Dia. 1 D3 Dia. 2 2 D5 D2 2 D4 W2 W3 W1 W3 W3 W3 2 W2 2 D1 2 2 2 2 2 2 2 2 H1 H2 2 2 Operator (Shown with Optional Disconnect) 2 2 2 H3 2 2 hp Voltage (IH) 480V 400–550 690V 400–500 W1 W2 31.26 2.40 (794) (61) W3 W4 W5 W6 W7 W8 H1 H2 H3 D1 6.50 (165) 0.79 (20) 3.43 (87) 2.95 (75) 2.
2.4 2 2 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) FR11 Open Chassis H2 2 W3 W3 W2 W2 W2 W2 2 2 2 2 2 2 Shown without terminal cover 2 2 H1 2 2 2 2 W1 2 2 2 2 2 2 2 D1 D2 2 2 2 2 Voltage hp (IH) W1 W2 W3 H1 H2 D1 D2 Weight Lbs (kg) 480V 400–550 27.9 (709) 8.6 (225) 2.6 (67) 45.5 (1155) 33.5 (850) 19.8 (503) 18.4 (468) 833 (378) 575V 400–500 2 2 2 2 V6-T2-132 Volume 6—Solid-State Motor Control CA08100007E—June 2012 www.eaton.
2.4 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) 2 FR13, Open Chassis Inverter W3 2 D6 2 Dia. 4 2 D8 2 D7 D5 W4 W4 W4 W4 W4 Dia. 1 D1 D2 2 D6 2 W1 2 2 2 H3 H1 2 H4 2 2 2 H2 Dia. 2 Dia. 3 W2 W2 W2 W2 D4 D4 2 H5 2 2 2 Dia. 3 D3 W1 W2 W3 W4 W5 H1 H2 H3 H4 H5 27.87 (708) 5.91 (150) 26.65 (677) 4.57 (116) 3.35 (85) 41.54 2.46 39.86 41.34 0.79 (1055) (62.5) (1012.
2.4 2 2 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) FR13, Open Chassis Converter Dia. 3 W3 2 D9 2 D8 2 D7 2 2 D6 Dia. 1 W4 W4 W4 D1 D2 W1 2 2 2 2 H4 H1 H3 2 2 2 2 H2 2 W2 D4 W2 D5 D5 2 H5 Dia. 2 2 2 Dia. 2 2 D3 2 2 2 H2 H3 H4 H5 W5 W1 W2 W3 W4 W5 H1 D1 18.74 (476) 5.91 (150) 17.52 (445) 4.57 (116) 3.35 (85) 41.54 2.46 39.86 41.34 0.69 14.69 (1055) (62.5) (1012.5) (1050) (17.5) (373) D2 D3 0.51 (13) 0.73 6.42 (18.
2.4 Adjustable Frequency Drives SPX9000 Drives Approximate Dimensions in Inches (mm) 2 FR13, Open Chassis Converter—900/1000 hp 480V Dia. 4 2 D9 2 D8 2 D7 2 W3 2 D6 Dia. 1 W4 W4 W4 W4 W4 D1 W1 D2 2 2 2 2 H1 H3 H4 2 2 2 2 2 H2 Dia. 2 W2 W2 W2 D4 W2 D5 D5 H5 Dia. 3 2 2 2 2 D3 W1 W2 W3 W4 W5 H1 H2 H3 H4 H5 D1 27.87 (708) 5.91 (150) 26.65 (677) 4.57 (116) 3.35 (85) 41.54 2.46 39.86 41.34 0.69 14.69 (1055) (62.5) (1012.5) (1050) (17.
2.
Adjustable Frequency Drives SPX9000 Drives 2.4 Approximate Dimensions in Inches (mm) 2 CHK0400 2 2 2 .24 (6) 4.72 (120) 2 2 4.72 (120) 2 9.37 (238) 1.54 (39) 2 13.79 (350) 1 1 2 1 2 13.94 (354) 2.64 (67) .75 (19) .59 (15) 2 16.58 15.08 (421) (383) 1.18 (30) .59 (15) 3 3 3 2 2 2 2 2 5.51 (140) 2 5.90 (150) 10.83 (275) 10.30 (262) 2 2 CHK0261 2 2 2 .24 (6) 4.72 (120) 2 4.72 (120) 2 13.79 (350) 2 8.11 (206) 1.54 (39) 2 1 1 2 1 .59 (15) 1.18 (30) .87 (22) .
2.5 2 Adjustable Frequency Drives H-Max Series Drives Contents H-Max Series Drives Description H-Max Series Drives H-Max Drives . . . . . . . . . . . . . . . . . . . . . . . . . . H-Max IntelliPass and IntelliDisconnect Drives . . . . . . . . . . . . . . . . . 2 2 2 Page V6-T2-139 V6-T2-149 2 2 2 2 2 2 2 Product Overview 2 H-Max Family Introduction 2 2 2 2 2 2 2 2 2 Eaton’s H-Max™ Series VFD is the next generation of drives specifically engineered for HVAC pump and fluid control applications.
Adjustable Frequency Drives H-Max Series Drives 2.5 Contents H-Max Drives Description Page H-Max Drives Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacement Parts . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . .
2.5 Adjustable Frequency Drives H-Max Series Drives 2 Catalog Number Selection 2 H-Max Series Drives HMX 3 4 A G 3D4 2 1 - N 2 2 Product HMX = HVAC drive 2 Braking/Application N = No brake chopper (low overload) Phase 3 = Three-phase 2 2 Enclosure 1 = Open NEMA Type 1 IP21 2 = Open NEMA Type 12 IP54 Voltage 2 = 200–240V 4 = 380–480V 2 2 Input Options Frame and Voltage Specific 2 = EMC C2 Software Series A–Z 2 Keypad G = Graphical panel 2 2 200–240 Volts 3D7 = 3.7A–0.75 hp, 0.
2.5 Adjustable Frequency Drives H-Max Series Drives Product Selection 2 H-Max Series Drives—230 Vac NEMA Type 1 FS Frame Size Drive Output Current Low Overload Full Load Amps at 40°C 4 3.7 5 2 Horsepower Assigned Motor Ratings 230 Vac Drive kW NEC Amps 1 230 Vac/50 Hz Low Overload Full Load Amps at 50°C Catalog Number 0.75 0.55 3.2 2.6 HMX32AG3D721-N 4.8 1 0.75 4.2 3.7 HMX32AG4D821-N 6.6 1.5 1.1 6.6 4.8 HMX32AG6D621-N 8 2 1.5 6.8 6.6 HMX32AG8D021-N 11 3 2.2 9.
2.5 Adjustable Frequency Drives H-Max Series Drives 2 H-Max Series Drives—480 Vac 2 NEMA Type 1 NEMA Type 1/IP21 FS Frame Size 2 4 Drive Output Current Low Overload Full Load Amps at 40°C Horsepower Assigned Motor Ratings Drive kW 480 Vac 400 Vac/50 Hz NEC Amps 1 Low Overload Full Load Amps at 50°C Catalog Number 3.4 1.5 1.1 2.1 2.6 HMX34AG3D421-N 4.8 2 1.5 3.4 3.4 HMX34AG4D821-N 2 5.6 3 2.2 5.6 4.8 HMX34AG5D621-N 8.0 4 3.0 N/A 5.6 HMX34AG8D021-N 2 9.6 5 4 7.
Adjustable Frequency Drives H-Max Series Drives 2.5 Onboard Network Communications Johnson Controls Metasys N2 H-Max Series provides communication between the drive and a Johnson Controls Metasys™ N2 network. With this connection, the drive can be controlled, monitored and programmed from the Metasys system. N2 can be selected and programmed by the drive keypad. 2 BACnet Modbus RTU H-Max Series provides communication to BACnet networks. Data transfer is master-slave/token passing (MS/TP) RS-485.
2.5 Adjustable Frequency Drives H-Max Series Drives 2 Accessories 2 Flange Kits The flange kit is used when the power section heat sink is mounted through the back panel of an enclosure. Keypad Accessories Flange Kit NEMA Type 1/IP21 Includes flange, mounting brackets, and screws.
Adjustable Frequency Drives H-Max Series Drives 2.
2.
2.
2.5 2 2 Adjustable Frequency Drives H-Max Series Drives Dimensions Approximate Dimensions in Inches (mm) H-Max Series Frames FS4–FS7 2 W2 2 2 2 H1 H3 H2 W1 2 2 W3 D 2 2 Voltage hp kW Amps D H1 Hole Center-to-Center H2 7.77 (197.3) 12.89 (327.5) 12.32 (313.0) 11.22 (285.0) 5.04 (128.0) 3.94 (100.0) 3.94 (100.0) 13.2 (6) 8.73 (221.6) 16.50 (419.0) 15.98 (406.0) 15.04 (382.0) 5.67 (144.0) 4.53 (115.0) 3.94 (100.0) 22.0 (10) 9.29 (236.0) 21.93 (557.0) 21.28 (540.5) 20.
Adjustable Frequency Drives H-Max Series Drives 2.5 Contents H-Max IntelliPass and IntelliDisconnect Drives Description Page H-Max Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-Max IntelliPass and IntelliDisconnect Drives Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . .
2.5 Adjustable Frequency Drives H-Max Series Drives 2 Catalog Number Selection 2 H-Max Series IntelliPass and IntelliDisconnect Drives HMX 011 3 4 N A 2 2 2 2 2 2 2 2 2 2 2 2 Product HMX = HVAC drive (VT) (low overload) NEC Ampere Ratings 208 Volts 480 Volts 4D5 = 4.5A—1 hp 2D1 = 2.1A—1 hp 7D5 = 7.5A—2 hp 3D4 = 3.4A—2 hp 011 = 11A—3 hp 5D6 = 5.6A—3 hp 017 = 17A—5 hp 9D6 = 9.6A—5 hp 025 = 25A—7.5 hp 011 = 11A—7.
Adjustable Frequency Drives H-Max Series Drives 2.5 Product Selection 2 H-Max Series IntelliPass NEMA Type 1—Two Contactor Bypass Standard HMX_ 2 208 Vac FS Frame Size Horsepower Drive Rated NEC Amps Catalog Number 4 1 4.5 HMX4D531NA 2 7.5 HMX7D531NA 5 3 10.6 HMX01131NA 5 16.7 HMX01731NA 7.5 24.2 HMX02531NA 10 30.8 HMX03131NA 6 15 46.2 HMX04731NA 20 59.4 HMX06031NA 7 25 74.
2.5 Adjustable Frequency Drives H-Max Series Drives 2 H-Max Series IntelliDisconnect NEMA Type 1—Main Disconnect Standard 2 HMX_ 208 Vac FS Frame Size Horsepower Drive Rated NEC Amps Catalog Number 4 1 4.5 HMX4D5A1NA 2 7.5 HMX7D5A1NA 3 11 HMX011A1NA 5 17 HMX017A1NA 7.5 25 HMX025A1NA 10 31 HMX031A1NA 15 47 HMX047A1NA 20 60 HMX060A1NA 25 75 HMX075A1NA 30 88 HMX088A1NA FS Frame Size Horsepower Drive Rated NEC Amps Catalog Number 4 1 4.2 HMX4D2A2NA 2 7.
Adjustable Frequency Drives H-Max Series Drives 2.5 Onboard Network Communications Johnson Controls Metasys N2 H-Max Series provides communication between the drive and a Johnson Controls Metasys™ N2 network. With this connection, the drive can be controlled, monitored and programmed from the Metasys system. N2 can be selected and programmed by the drive keypad. 2 BACnet Modbus RTU H-Max Series provides communication to BACnet networks. Data transfer is master-slave/token passing (MS/TP) RS-485.
2.
2.
2.
Adjustable Frequency Drives H-Max Series Drives H-Max Series IntelliPass 2.
2.5 2 2 Adjustable Frequency Drives H-Max Series Drives Dimensions Approximate Dimensions in Inches (mm) H-Max Series IntelliPass and IntelliDisconnect Drives 2 W1 H3 2 D1 2 2 2 2 2 H4 2 H1 H2 2 2 2 2 2 2 W3 W2 C D2 2 Consult factory or use manual for final dimensions. 2 Frame Size Voltage Horsepower (IL) H1 H2 H3 H4 C W1 W2 W3 D1 D2 2 FS4 208 1–3 1–3 29.69 (754.1) 37.12 (942.9) 0.25 (6.35) 31.00 (914.4) 3.00 (76.2) 7.88 (200.2) 6.33 (160.8) 0.75 (19.1) 11.
Adjustable Frequency Drives CFX9000 Drives 2.6 Contents CFX9000 Enclosed Drives Description Page CFX9000 Drives Application Description . . . . . . . . . . . . . . . . . . . Features and Benefits . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . Product Identification . . . . . . . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Options . . . . . . . . . . . .
2.6 2 2 2 2 2 2 2 Adjustable Frequency Drives CFX9000 Drives Application Description Designed to meet the IEEE® 519-1992 requirements for harmonic distortion, the CFX9000 is an excellent choice for small and midsize drives applications where harmonics are a concern. What Are Harmonics? Take a perfect wave with a fundamental frequency of 60 Hz, which is close to what is supplied by the power company.
2.6 Adjustable Frequency Drives CFX9000 Drives How Does a VFD Convert Three-Phase AC to a Variable Output Voltage and Frequency? Guidelines of Meeting IEEE Std. 519-1992 Harmonic Distortion Limits 2 The six-pulse VFD: The majority of all conventional drives that are built consist of a six-pulse configuration. The figure below represents a sixdiode rectifier design that converts three-phase utility power to DC.
2.
2.6 Adjustable Frequency Drives CFX9000 Drives 2. Passive Filters Tuned harmonic filters involve the series connection of an inductor with the shunt connection of an inductor and capacitor to form a low impedance path to ground for 2 a specific range of frequencies. This path presents an alternative to the flow of harmonic currents back into the utility source.
2.6 2 2 2 2 2 2 2 Adjustable Frequency Drives CFX9000 Drives 3. 12-Pulse Converters A 12-pulse converter incorporates two separate AFD input semiconductor bridges, which are fed from 30º phase shifted power sources with identical impedance. The sources may be two isolation transformers, where one is a delta/wye design (which provides the phase shift) and six-pulse converter).
2.6 Adjustable Frequency Drives CFX9000 Drives 4. Clean Power Drives When the total load is comprised of non-linear load such as drives, and the ratio is lsc/IL, the greatest harmonic mitigation is required. Under these conditions, the currents drawn from the supply need to be sinusoidal and “clean” such that system interference and additional losses are negligible.
2.
2.
2.6 Adjustable Frequency Drives CFX9000 Drives 2 Product Selection 2 When Ordering ● Select a base catalog number that meets the application requirements— nominal horsepower, voltage and enclosure rating. (The enclosed drive’s continuous output amp rating should be equal to or greater than the motor’s full load amp rating.) The base enclosed package includes a standard drive, doormounted alphanumeric panel and enclosure.
2.6 Adjustable Frequency Drives CFX9000 Drives 208V Drives CFX9000 Drive 2 UL Type 1, UL Type 12, UL Type 3R and NEMA 12 Filtered hp NEC Current (A) Chassis Frame UL Type 1 Base Catalog Number UL Type 12 and NEMA 12 Filtered Base Catalog Number UL Type 3R Base Catalog Number Low Overload Drive 7-1/2 24.2 FR5 1 CFX00721BA CFX00731BA 10 30.8 FR5 1 CFX01021BA CFX01031BA 15 46.2 FR6 1 CFX01521BA CFX01531BA 20 59.4 FR6 1 CFX02021BA CFX02031BA 25 74.
2.
2.
2.
2.
2.
2.6 Adjustable Frequency Drives CFX9000 Drives Options 2 CFX9000 Series Option Board Kits 2 The CFX9000 Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards. 2 The CFX9000 Series factory-installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
2.6 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Adjustable Frequency Drives CFX9000 Drives Modbus RTU Network Communications The Modbus Network Card OPTC2 is used for connecting the 9000X Drive as a slave on a Modbus network. The interface is connected by a 9-pin DSUB connector (female) and the baud rate ranges from 300 to 19,200 baud. Other communication parameters include an address range from 1 to 247; a parity of None, Odd or Even; and the stop bit is 1.
Adjustable Frequency Drives CFX9000 Drives 2.6 Control/Communication Option Descriptions 2 Available Control/Communications Options 2 Option Description Option Type K1 Door-Mounted Speed Potentiometer—Provides the drive with the ability to adjust the frequency reference using a door-mounted potentiometer. This option uses the 10 Vdc reference to generate a 0–10V signal at the analog voltage input signal terminal.
2.6 2 Adjustable Frequency Drives CFX9000 Drives Available Control/Communications Options, continued Option Description Option Type RA Manual HOA Bypass Controller—The manual HAND/OFF/AUTO (HOA)—three-contactor—bypass option provides a means of bypassing the CFX9000, allowing the AC motor to be operated at full speed directly from the AC supply line.
2.
2.
Adjustable Frequency Drives CFX9000 Drives 2.
2.6 2 2 2 Adjustable Frequency Drives CFX9000 Drives Wiring Diagram Control Input/Output Basic Application Default I/O Configuration Reference potentiometer 1–10 kohms Terminal 2 2 2 Signal Description OPTA9 Remote reference 0(4)–20 mA 2 2 2 2 2 1 +10Vref Reference output Voltage for potentiometer, etc.
Adjustable Frequency Drives CFX9000 Drives 2.6 Dimensions Approximate Dimensions in Inches (mm) 2 Enclosure Size B—UL Type 12 2 4.00 (101.6) Minimum Free Air Space Required 2 3.00 (76.2) Minimum Air Space Required Both Sides 2 2 2 2 2 2 H H1 H2 2 2 2 2 2 0.44 (11.2) Mounting Holes (4 Places) W1 W D1 2 D 2 2 2 2 2 H H1 H2 W W1 D D1 40.00 (1016.0) 38.00 (965.2) 36.35 (923.3) 20.92 (531.4) 19.30 (490.2) 16.76 (425.7) 2.34 (59.
2.6 2 2 2 Adjustable Frequency Drives CFX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Size C—UL Type 12 0.44 (11.2) Mounting 4.00 (101.6) Minimum Holes Free Air Space Required (4 Places) 0.44 (11.2) Mounting Holes (4 Places) 3.00 (76.2) Minimum Air Space Required Both Sides W1 3.00 (76.2) Minimum Air Space Required Both Sides 4.00 (101.
Adjustable Frequency Drives CFX9000 Drives 2.6 Approximate Dimensions in Inches (mm) 2 Enclosure Size B—UL Type 3R W 2 D 2 2 2 2 2 2 H2 2 H H1 2 H3 2 2 2 2 2 W2 W1 W3 2 D1 D2 0.44 (11.2) Mounting Holes (4 Places) 2 2 2 2 2 2 2 H H1 H2 H3 W W1 W2 W3 D D1 D2 46.09 (1170.7) 44.45 (1129.0) 42.77 (1086.4) 36.35 (923.3) 26.31 (668.3) 20.92 (531.4) 19.30 (490.2) 2.69 (68.3) 17.74 (450.6) 16.76 (425.7) 3.31 (840.
2.6 2 2 Adjustable Frequency Drives CFX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Size C—UL Type 3R 0.44 (11.2) Mounting Holes (4 Places) 2 W 2 0.44 (11.2) Mounting Holes (4 Places) D W W2 D 2 2 2 2 H1 H2 2 H3 H2 H3 H 2 H4 H5 2 2 2 W2 W1 2 D1 D2 W3 2 2 D1 W1 D2 2 2 2 2 2 H H1 H2 H3 H4 H5 W W1 W2 W3 D D1 D2 2 58.09 (1475.5) 56.45 (1433.8) 54.77 (1391.2) 48.35 (1228.1) 78.09 (1983.5) 77.64 (1972.1) 37.73 (958.3) 30.92 (785.4) 29.30 (744.2) 3.
Adjustable Frequency Drives CFX9000 Drives 2.6 Approximate Dimensions in Inches (mm) 2 Enclosure Size D—UL Type 3R W1 W2 2 D1 Ø0.44 (11.2) Mounting Holes (two places) 2 2 2 2 2 2 2 2 2 H H1 2 2 2 2 2 2 2 2 D W 2 2 2 2 H H1 W W1 W2 D D1 76.27 (1937.3) 96.00 (2438.4) 30.92 (784.4) 37.73 (958.3) 29.30 (744.2) 16.76 (424.7) 17.74 (450.6) 2 Approximate Shipping Weight Lbs (kg) 2 1000 (454) 2 Note Shown with optional floor stands.
2.6 2 2 Adjustable Frequency Drives CFX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Size F W D 2 2 2 2 2 2 2 H1 2 H 2 2 2 2 2 W1 D1 2 2 2 2 2 2 2 H H1 W W1 D D1 2 93.58 (2376.9) 69.51 (1765.60) 60.00 (1524.0) 48.00 (1219.2) 37.50 (952.5) 26.00 (660.4) Approximate Weight Lbs (kg) Approximate Shipping Weight Lbs (kg) 1700 (771) 1850 (839) 2 2 2 2 2 2 2 V6-T2-188 Volume 6—Solid-State Motor Control CA08100007E—June 2012 www.eaton.
2.6 Adjustable Frequency Drives CFX9000 Drives Approximate Dimensions in Inches (mm) 2 Enclosure Size 7 Exhaust Air For Cable Entry 20.00 (508.0) 26.25 (666.8) 2 4.79 (121.7) 2 2 15.00 (381.0) Hinged Side Door Clearance 10.00 at 90° (254.0) Top View 2 2 2.00 (50.8) 2 2 4.00 (101.6) Minimum Free Air Space Required 2 2 2 Keypad 2 Flanged Disconnect Supplied with Circuit Breaker When Specified 93.92 (2385.6) 90.00 (2286.0) 84.37 (2143.
2.6 2 2 Adjustable Frequency Drives CFX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Size 8 1.25 (31.8) 2 31.00 (787.4) 8.25 (209.6) 2 Opening for Top Cable Entry (2 Places) 2 2 2 Top View 2 4.00 (101.6) Minimum Free Air Space Required 2 Keypad 2 Flanged Disconnect Supplied with Circuit Breaker When Specified 2 Operator Elements When Specified, Mounted on These Panels 2 2 2 2 Door Handle (key-lock optional) 93.50 (2374.9) 90.00 (2286.0) 84.37 (2143.
2.6 Adjustable Frequency Drives CFX9000 Drives Approximate Dimensions in Inches (mm) 2 Enclosure Size 9 2 43.50 (1104.9) 1.50 (38.1) 2 8.75 (222.3) 2 7.46 x 15.00 (189.5 x 381.0) Access in Top (two places) 2 90 Max. Door Opening 27.36 (694.9) 90 Max. Door Opening 2 2 27.06 (687.3) 2 29.05 (737.9) 2 Top View 2 4.00 (101.6) Minimum Free Air Space Required 2 2 2 2 93.50 (2374.9) 2 Drive Circuit Breaker 2 2 90.00 (2286.
2.7 2 Adjustable Frequency Drives CPX9000 Drives Contents CPX9000 Enclosed Clean Power Drives Description 2 Page CPX9000 Enclosed Clean Power Drives Application Description . . . . . . . . . . . . . . . . . . Features and Benefits . . . . . . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . .
Adjustable Frequency Drives CPX9000 Drives 2.7 Application Description Designed to exceed the IEEE® 519-1992 requirements for harmonic distortion, the CPX9000 is the clear choice for applications in the water, wastewater, HVAC, industrial and process industries where harmonics are a concern. What Are Harmonics? Take a perfect wave with a fundamental frequency of 60 Hz, which is close to what is supplied by the power company.
2.7 Adjustable Frequency Drives CPX9000 Drives 2 How Does a VFD Convert Three-Phase AC to a Variable Output Voltage and Frequency? Guidelines of Meeting IEEE Std. 519-1992 Harmonic Distortion Limits 2 The six-pulse VFD: The majority of all conventional drives that are built consist of a six-pulse configuration. The figure below represents a six-diode rectifier design that converts three-phase utility power to DC.
2.
2.7 2 2 2 2 2 2 2 Adjustable Frequency Drives CPX9000 Drives 2. 12-Pulse Converters A 12-pulse converter incorporates two separate AFD input semiconductor bridges, which are fed from 30º phase shifted power sources with identical impedance.
2.7 Adjustable Frequency Drives CPX9000 Drives 3. Clean Power Drives When the total load is of nonlinear, the greatest harmonic mitigation is required. Under these conditions, the currents drawn from the supply need to be sinusoidal and “clean” such that system interference and additional losses are negligible. Eaton’s CPX9000 clean power drive uses a phase-shifting auto-transformer with delta-connected winding. Three of the output phases are advanced and three are retarded.
2.
2.7 Adjustable Frequency Drives CPX9000 Drives Catalog Number Selection 2 CPX9000 Enclosed Drive Type Enclosed Options 234 Product Family CPX = Clean power 18-pulse enclosed drives 025 = 25 hp 030 = 30 hp 040 = 40 hp 050 = 50 hp 060 = 60 hp 075 = 75 hp 2 Build options alphabetically and numerically.
2.7 2 2 2 2 2 2 2 2 Adjustable Frequency Drives CPX9000 Drives Product Selection When Ordering ● Select a base catalog number that meets the application requirements— nominal horsepower, voltage and enclosure rating. (The enclosed drive’s continuous output amp rating should be equal to or greater than the motor’s full load amp rating.) The base-enclosed package includes a standard drive, doormounted alphanumeric panel and enclosure.
Adjustable Frequency Drives CPX9000 Drives CPX9000 Drive 2.
2.
Adjustable Frequency Drives CPX9000 Drives CPX9000 Drive 2.
2.
Adjustable Frequency Drives CPX9000 Drives 2.
2.
Adjustable Frequency Drives CPX9000 Drives CPX9000 Drive 2.
2.7 2 2 2 2 2 2 2 CPX9000 Drives Options CPX9000 Series Option Board Kits The CPX9000 Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards (see figure below). The CPX9000 Series factory- installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
Adjustable Frequency Drives CPX9000 Drives Modbus RTU Network Communications The Modbus Network Card OPTC2 is used for connecting the 9000X Drive as a slave on a Modbus network. The interface is connected by a 9-pin DSUB connector (female) and the baud rate ranges from 300 to 19,200 baud. Other communication parameters include an address range from 1 to 247; a parity of None, Odd or Even; and the stop bit is 1.
2.7 Adjustable Frequency Drives CPX9000 Drives 2 Control/Communication Option Descriptions 2 For availability, see Product Selection for base drive voltage required. 2 Available Control/Communications Options 2 Option Description K1 Door-Mounted Speed Potentiometer—Provides the CPX9000 with the ability to adjust the frequency reference using a door-mounted potentiometer. This option uses the 10 Vdc reference to generate a 0–10V signal at the analog voltage input signal terminal.
2.7 Adjustable Frequency Drives CPX9000 Drives For availability, see Product Selection for base drive voltage required. 2 Available Control/Communications Options, continued Option Type 2 Option Description RA Manual HOA Bypass Controller—The manual HAND/OFF/AUTO (HOA)—three-contactor—bypass option provides a means of bypassing the CPX9000, allowing the AC motor to be operated at full speed directly from the AC supply line.
2.
2.
2.
Adjustable Frequency Drives CPX9000 Drives CPX9000 Drives Description 2.
2.
Adjustable Frequency Drives CPX9000 Drives 2.7 Dimensions Approximate Dimensions in Inches (mm) 2 Enclosure Size 7 2 25–150 hp IL and 25–125 hp IH 480V—25–100 hp IL and 25–75 hp IH 575V 2 20.00 (508.0) For Cable Entry 26.25 (666.8) Hinged Side Door Clearance at 90º 10.00 (254.0) 2 4.79 (121.7) Exhaust Air 2 15.00 (381.0) 2 2 2.00 (50.8) 2 Top View 2 4.00 (101.
2.7 2 2 2 Adjustable Frequency Drives CPX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Size 8 200–250 hp IL and 150–200 hp IH 480V—125–200 hp IL and 100–150 hp IH 575V 1.25 (31.8) 2 31.00 (787.4) 8.25 (209.6) 2 2 2 For Top Cable Entry (two places) 2 Top View 2 4.00 (101.6) Minimum Free Air Space Required 2 2 2 2 Drive Circuit Breaker 2 2 2 2 90.00 (2286.0) 93.50 (2374.9) 84.37 (2143.0) 2 Door Handle (key-lock optional) 2 2 2 2 2 21.45 (544.8) 24.00 (609.
2.7 Adjustable Frequency Drives CPX9000 Drives Approximate Dimensions in Inches (mm) 2 Enclosure Size 9 2 300–400 hp IL and 250–350 hp IH 480V—250–400 hp IL and 200–300 hp IH 575V 2 43.50 (1104.9) 1.50 (38.1) 2 8.75 (222.3) 2 7.46 x 15.00 (189.5 x 381.0) Access in Top (two places) 2 90 Max. Door Opening 27.36 (694.9) 90 Max. Door Opening 2 2 27.06 (687.3) 2 29.05 (737.9) 2 Top View 2 4.00 (101.6) Minimum Free Air Space Required 2 2 2 2 93.50 (2374.
2.7 2 2 2 Adjustable Frequency Drives CPX9000 Drives Approximate Dimensions in Inches (mm) Enclosure Size 10 500–600 hp IL and 400–500 hp IH 480V—500–600 hp IL and 400–500 hp IH 575V 15.63 (397.0) 2 9.03 (229.4) 2 2 21.00 x 10.00 (533.4 x 254.0) Access in Top 2 2 Top View 2 4.00 (101.
Adjustable Frequency Drives CPX9000 Drives 2.7 Approximate Dimensions in Inches (mm) 2 Enclosure Size F Type 3R Drives 2 25–250 hp IL and 25–200 hp IH 480V—25–200 hp IL and 25–150 hp IH 575V Type 3R Drives 60.00 (1524.0) 2 37.50 (952.5) 2 18.00 x 8.50 (457.2 x 215.9) Side Access Exhaust Air Venting Slots Enclosure Door Stop 2 Flanged Disconnect Supplied with Circuit Breaker When Specified Key Locking Three-Position Latch 93.50 Filtered (2374.
2.8 2 Adjustable Frequency Drives LCX9000 Drives LCX9000 Liquid Cooled Adjustable Frequency Drives Contents Description 2 Page LCX9000 Drives Catalog Number Selection . . . . . . . . . . . . . . . . Product Selection . . . . . . . . . . . . . . . . . . . . . . . Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specifications . . . . . . . . . . Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . .
Adjustable Frequency Drives LCX9000 Drives 2.
2.8 2 2 2 Adjustable Frequency Drives LCX9000 Drives Product Selection LCX9000 Liquid Cooled Drives 380–500 Vac Liquid Cooled Drives Motor Output Current 2 Thermal, Ith (A) IL (A) IH (A) kW Chassis Catalog Number 16 15 11 7.5 CH3 LCX016A0-4A3N2 22 20 15 11 CH3 LCX022A0-4A3N2 2 31 28 21 15 CH3 LCX031A0-4A3N2 38 35 25 18.
2.
2.8 2 LCX9000 Liquid Cooled Drives 2 Adjustable Frequency Drives LCX9000 Drives 540–675 Vdc Liquid Cooled Inverter Units, continued Drive Output Current Motor Output Power Rated Cont. IH (A) Optimum Motor at Ith 400V (kW) Optimum Motor at Ith 500V (kW) Power Loss c/a/T (kW) Chassis Catalog Number 591 433 355 450 8.5/0.6/9.1 CH62 LCX650A0-4A7N2 664 487 400 500 10.0/0.7/10.7 CH62 LCX730A0-4A7N2 820 745 547 450 560 12.5/0.8/13.3 CH63 LCX820A0-4A7N2 920 836 613 500 600 14.
2.8 Adjustable Frequency Drives LCX9000 Drives Options 2 9000X Series Option Board Kits 2 The 9000X Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards. 2 The 9000X Series factory installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
2.8 2 2 2 2 2 2 Adjustable Frequency Drives LCX9000 Drives Line Reactors The line reactor carries out several functions in the liquid cooled drive. Connection of the line reactor is necessary except if you have a component in your system that performs the same tasks (e.g. a transformer). The line reactor is needed as an essential component for motor control, to protect the input and DC-link components against abrupt changes of current and voltage as well as to function as a protection against harmonics.
Adjustable Frequency Drives LCX9000 Drives 2.
2.
2.
2.8 2 2 Adjustable Frequency Drives LCX9000 Drives A2 Option Board Wiring Basic Relay Board A2 RO1/1 21 RO1/2 22 2 RO1/3 23 2 RO2/1 24 RO2/2 25 RO2/3 26 2 2 2 RL AC / DC Switching: <8 A / 24 Vdc <0.
Adjustable Frequency Drives LCX9000 Drives 2.8 Approximate Dimensions in Inches (mm) 2 LCX9000 Drives 2 Chassis Size, CH3 H2 W1 W2 2 R2 2 2 2 2 Top H1 2 2 2 H3 W3 Front 2 Bottom D1 R1 Side Voltage Amps H1 H2 H3 D1 W1 W2 W3 R1 Dia. R2 Dia. 380–500 Vac 16–61 16.97 (431.0) 0.53 (13.5) 0.59 (15.0) 9.69 (246.0) 6.30 (160.0) 4.80 (122.0) 4.80 (122.0) 0.39 (10.0) 0.35 (9.
2.8 2 2 Adjustable Frequency Drives LCX9000 Drives Approximate Dimensions in Inches (mm) Chassis Size, CH5 W1 2 W2 R1 2 2 2 2 Top H1 H3 2 2 2 2 H2 W3 2 2 2 Bottom D1 R1 Front Side Voltage Amps H1 H2 H3 D1 W1 W2 W3 R1 Dia. R2 Dia. Weight Lbs (kg) 380–500 Vac 168–261 21.77 (553.0) 1.30 (33.0) 19.88 (505.0) 10.39 (264.0) 9.69 (246) 3.94 (100.0) 7.87 (200.0) 0.51 (13.
Adjustable Frequency Drives LCX9000 Drives 2.8 Approximate Dimensions in Inches (mm) 2 Liquid-Cooled Inverter—Chassis Size, CH62 2 W1 R2 2 W2 2 2 2 2 Top H1 H3 2 2 2 H2 Bottom D1 W3 Side Front 2 R1 2 Voltage Amps H1 H2 H3 D1 W1 W2 W3 R1 Dia. R2 Dia. 540–675 Vdc 460–730 710–930 Vdc 325–502 26.50 (673) 2.0 (53) 23.23 (590) 14.69 (373) 9.69 (246) 3.94 (100) 5.91 (150) 0.55 (14) 0.
2.8 2 2 Adjustable Frequency Drives LCX9000 Drives Approximate Dimensions in Inches (mm) Liquid-Cooled Inverter with Mounting Bracket, Chassis Size CH64, IP90 2 2 2 2 2 Top Bottom 2 H2 2 2 2 2 2 H3 H1 2 2 2 2 2 2 W2 2 2 2 2 W2 W2 R1 W1 Right Side D1 Front Left Side Voltage Amps H1 H2 H3 D1 W1 W2 R1 Dia. 540–675 Vdc 1370–4140 710–930 Vdc 820–3100 36.38 (924) 1.03 (26) 34.37 (873) 15.35 (390) 29.37 (746) 7.87 (200) 0.
Adjustable Frequency Drives LCX9000 Drives 2.8 Approximate Dimensions in Inches (mm) 2 Chassis Size, CH72 W1 2 R1 2 2 2 2 Top 2 H3 H1 2 2 2 2 Bottom 2 H2 W1 R2 2 D1 Front Side Voltage Amps H1 H2 H3 D1 W1 R1 Dia. R2 Dia. 380–500 Vac 460–730 525–690 Vac 261–502 42.38 (1076.5) 1.57 (40.0) 39.37 (1000.0) 14.65 (372.0) 7.87 (200.0) 0.55 (14.0) 0.51 (13.
2.8 2 2 Adjustable Frequency Drives LCX9000 Drives Approximate Dimensions in Inches (mm) Chassis Size, CH74 R2 2 2 2 2 2 2 Top H1 2 H3 2 2 2 2 2 Bottom H2 2 W2 W3 W4 2 2 2 2 2 D1 R1 W4 W1 Front Voltage Side Amps H1 H2 H3 D1 W1 W2 W3 W4 R1 Dia. R2 Dia. 380–500 Vac 1370–2300 525–690 Vac 820–1500 42.38 (1076.5) 1.57 (40.0) 39.37 (1000.0) 14.65 (372.0) 29.06 (738.0) 0.91 (23.0) 7.87 (200.0) 9.69 (246) 0.51 (13.0) 0.55 (14.
Adjustable Frequency Drives SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products 2.9 Contents SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products Description Page SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products Application Description . . . . . . . . . . . . . . . . . . . Product Comparison . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certifications . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . .
2.9 2 2 2 2 Adjustable Frequency Drives SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products Application Description The common DC bus product portfolio fulfills all solution demands with a flexible architecture. Front end units are selected according to the level of harmonics and power requirements. Typical drive system configurations are illustrated the following figures.
Adjustable Frequency Drives SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products 2.
2.
2.
2.
Adjustable Frequency Drives SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products LCL Filters Line Reactor LCL Filters for Active Front End (480V) Line Reactor for Non-Regenerative Front End (480/575VV) Amps Catalog Number Amps Catalog Number 10 REG 10 5 0 270 REG 270 5 0 18 REG 18 5 0 410 REG 410 5 0 32 REG 32 5 0 580 REG 580 5 0 48 REG 48 5 0 840 REG 840 5 0 75 REG 75 5 0 1160 REG 1160 5 0 110 REG 110 5 0 1480 REG 1480 5 0 180 REG 180 5 0 2.
2.9 2 2 2 2 2 SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products Options 9000X Series Option Board Kits The 9000X Series drives can accommodate a wide selection of expander and adapter option boards to customize the drive for your application needs. The drive’s control unit is designed to accept a total of five option boards. The 9000X Series factory installed standard board configuration includes an A9 I/O board and an A2 relay output board, which are installed in slots A and B.
Adjustable Frequency Drives SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products 2.
2.
2.9 Adjustable Frequency Drives SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products SHT fuses can be assembled into same-size DIN fuse base. 2 SPA9000/SPN9000/SPI9000, continued Module Component Frame Bussman Fuse Type (aR) Size UN (V) IN (A) Qty.
2.9 2 Adjustable Frequency Drives SPA9000/SPN9000/SPI9000 Common DC Bus Drive Products Dimensions Approximate Dimensions in Inches (mm) 2 SPA9000/SPN9000/SPI9000 2 Frame Height Width Depth Weight Lbs (kg) 2 Active Front Ends FI9 40.6 (1030) 9.4 (239) 14.6 (372) 148 (67) 2 FI10 40.6 (1032) 9.4 (239) 21.7 (552) 220 (100) 2 FI12 40.6 (1032) 2 x 9.4 (2 x 239) 21.7 (552) 441 (200) FI13 40.6 (1032) 27.9 (708) 21.8 (553) 674 (306) 2 FI14 40.6 (1032) 2 x 27.9 (2 x 708) 21.