Installation Manual

ManualsBrandsEaton ManualsConnection AdaptersETN Power XpertT Multi

Contents

Description Page

Introduction

Preliminary comments and

safety precautions .......................2

Warranty and liability information ............2

Safety precautions .......................2

Description

Catalog number identification ..............2

Catalog number example ..................2

Receiving, handling, and storage

Receiving and handling ...................3

Storage ................................3

Installation and wiring

General ................................3

Mounting location .......................3

Mounting procedure .....................3

Knockout procedure ......................3

Wiring .................................5

Field wiring .............................5

Door-locking means ......................5

Operation ...............................8

Maintenance ............................8

m WARNING

READ AND UNDERSTAND THE INSTRUCTIONS

CONTAINED HEREINAFTER BEFORE ATTEMPTING

TO UNPACK, ASSEMBLE, OPERATE, OR MAINTAIN

THIS EQUIPMENT.

m WARNING

HAZARDOUS VOLTAGES THAT CAN CAUSE DEATH OR

SEVERE PERSONAL INJURY ARE PRESENT INSIDE

ENCLOSURE. FOLLOW PROPER INSTALLATION,

OPERATION, AND MAINTENANCE PROCEDURES

TO AVOID THESE VOLTAGES.

m WARNING

ALL POSSIBLE CONTINGENCIES THAT MAY

ARISE DURING INSTALLATION, OPERATION, OR

MAINTENANCE, AND ALL DETAILS AND VARIATIONS

OF THIS EQUIPMENT DO NOT PURPORT TO BE

COVERED BY THESE INSTRUCTIONS. IF FURTHER

INFORMATION IS DESIRED BY PURCHASER

REGARDING THE PARTICULAR INSTALLATION,

OPERATION, OR MAINTENANCE OF PARTICULAR

EQUIPMENT, CONTACT AN EATON REPRESENTATIVE.

Effective August 2013

Instruction Booklet IB150002EN

Enclosed meter—

Power Xpert Multi-Point Meter

Summary of content (8 pages)

PAGE 1
Instruction Booklet IB150002EN Effective August 2013 Enclosed meter— Power Xpert Multi-Point Meter Contents Description Page Introduction Preliminary comments and safety precautions . . . . . . . . . . . . . . . . . . . . . . . Warranty and liability information. . . . . . . . . . . . Safety precautions. . . . . . . . . . . . . . . . . . . . . . . Description Catalog number identification . . . . . . . . . . . . . .
PAGE 2
Instruction Booklet IB150002EN Enclosed meter— Power Xpert Multi-Point Meter Effective August 2013 Introduction Description Preliminary comments and safety precautions Catalog number identification This technical document is intended to cover most aspects associated with the installation, application, operation, and maintenance of enclosed Power XpertT Multi-Point Meter (PXMP) equipment. It is provided as a guide for authorized and qualified personnel only.
PAGE 3
Instruction Booklet IB150002EN Enclosed meter— Power Xpert Multi-Point Meter Effective August 2013 Receiving, handling, and storage Receiving and handling Every effort is made to ensure that the enclosed PXMP equipment arrives at its destination undamaged and ready for installation. Crating and packing are designed to protect internal components as well as the enclosure. Do not remove protective packing until the equipment is ready for installation.
PAGE 4
Instruction Booklet IB150002EN Enclosed meter— Power Xpert Multi-Point Meter Effective August 2013 24.00 (609.6) 12.00 (304.8) 6.79 (172.5) Top View Left Side View 5.25 (133.4) 30.80 (782.3) Overall 30.00 (762.0) Enclosure Front View Right Side View HMI Cutout Front View (Door Removed) 23.63 (600.2) Door Front View (Door Removed) Bottom View Figure 2. Dimensions of Enclosed PXMP—NEMA 3R 24.00 (609.6) 12.00 (304.8) 6.79 (172.5) Top View 30.00 (762.
PAGE 5
Instruction Booklet IB150002EN Enclosed meter— Power Xpert Multi-Point Meter m CAUTION Effective August 2013 Field wiring EXTREME CARE SHOULD BE TAKEN TO PROTECT THE EQUIPMENT FROM DRILL CHIPS, FILINGS, AND OTHER CONTAMINANTS WHEN MAKING THE WIRE ENTRY HOLES AND MOUNTING THE ENCLOSURE TO PREVENT COMPONENT DAMAGE OR A FUTURE MALFUNCTION. NNote: All field wiring must be #14 AWG minimum.
PAGE 6
Instruction Booklet IB150002EN Enclosed meter— Power Xpert Multi-Point Meter Effective August 2013 Table 1.
PAGE 7
Enclosed meter— Power Xpert Multi-Point Meter Instruction Booklet IB150002EN Effective August 2013 Figure 5. 120–240 Vac, 50/60 Hz, Three-Phase, Four-Wire Wye System Figure 6. 480–600 Vac, 50/60 Hz, Three-Phase, Four-Wire Wye System eaton www.eaton.
PAGE 8
Instruction Booklet IB150002EN Enclosed meter— Power Xpert Multi-Point Meter Effective August 2013 Operation Maintenance Refer also to PXMP device instruction books. Refer to Installation Manual MN150001EN. The Enclosed PXMP is equipped with a two-position fused disconnect switch to enable switching voltage on and off to the PXMP device. This switch is marked SERVICE DISCONNECT. The terminal blocks for the current circuits are short-circuit type. Shorting screws are included.