User`s guide

Monitored ePDU Web Interface
Eaton
®
User's Guide for Basic, Monitored, and Switched ePDUt S 164202115 Rev 1
15
Configuration
Figure 7. ePDU Configuration Window (Typical)
After any changes are made, the Save Settings (Figure 8) button at the bottom of the
page must be pressed for any changes to take effect. If the web interface is closed
without pressing this button, all changes will be lost. If settings with an asterisk (*)
are changed, the ePDU will reboot after pressing the Save Settings button (Figure 8).
The user will have to reconnect to the unit after about 15 seconds.
Basic Settings
Unit Name: Up to 19 characters may be used to name the unit.
Asset ID: Up to 31 characters may be used to the designate the unit asset ID.
User Name: Up to 19 characters may be used. The default user name is Admin and
it is case sensitive. The user name may be operator changed and used to login. A soft
reboot is required for the name change to take effect.
Password: Up to 19 characters may be used. The default password is etn and it is
case sensitive. The password may be operator changed and used to login. A soft
reboot is required for the password change to take effect.