Data Sheet
DATASHEET - V-M25
Cable gland, M25, RAL 7035, IP68
Part no. V-M25
Catalog No. 206911
Alternate Catalog
No.
XTPAXMCG25
EL-Nummer
(Norway)
1782276
Delivery program
Product range General switchboard accessories
Accessories Cable management
Cable entry M25
Hole diameter mm 25,5
Outer cable diameter mm 9 - 17
Example of application: NYM/NYY cable, 4-core
mm
2
H05VV-F5 x 2.5/5 x 4,
NYM 5 x 2.5/5 x 6
Description Flammability classification V2 according to UL94
With lock nut and built-in strain relief
Material Polyamide
Halogen free
Surface finish RAL 7035
Information about equipment supplied With lock nut and built-in strain relief
Degree of Protection IP68 up to 5 bar (30 min)
Technical data
General
Climatic proofing Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Overvoltage category/pollution degree III/3
Degree of Protection IP68 up to 5 bar (30 min)
Contacts
Overvoltage category/pollution degree III/3
Material characteristics
Material Polyamide
Halogen free
Colour Gray, RAL 7035
Temperature resistant -20 °C - 100 °C, short-time up to approx. 120 °C
Chemical resistant Resistant against : Acetone, petrol, paraffin, diesel, grease, oil, solvent for paints
and varnishes
Danger of stress fracture low
Flame retardant Glow wire test 750 °C according to EN60695-2-11
Flammability classification according to UL94 V2
Mechanical variables
Overvoltage category/pollution degree III/3
Technical data ETIM 7.0
Cable and wire entry systems (EG000009) / Cable gland (EC000441)
Electric engineering, automation, process control engineering / Electrical installation, device / Connection devices / Screwed cable gland (electr.) (ecl@ss10.0.1-27-14-44-32 [AFR797003])
Thread type Metric
Nominal thread size metric/PG 25
Nominal thread size inch/gas pipe thread Other
Pitch thread mm 1.5
Thread length mm 10
Wrench width mm 36
Hexagon angular dimension mm 0
Suitable for cable diameter mm 9 - 12
Material Plastic
Material quality Polyamide (PA)
06/18/2021 Eaton 206911 ED2021 V80.0 EN 1 / 2