Cut Sheet

Beam Clamps
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Beam Clamps
42
Pipe Hangers & Supports
Size Range:
3
/8"-16 thru
7
/8"-9 rod
Material: Malleable Iron
Function: Designed for attaching a hanger rod to the bottom
flange of a beam. Adjustable for flange widths of 3"
(76.2mm) to
7"
(177.8mm) and a flange thickness of no greater than
5
/8" (15.9mm).
Approvals: Underwriters Laboratories Listed. Conforms to
Federal Specification WW-H-171E & A-A-1192A, Type 30 and
Manufacturers Standardization Society ANSI/MSS SP-69 &
SP-58, Type 30.
Finish: Plain or Electro-Galvanized
Ordering: Part number and finish
B3054 - Malleable Iron Beam Clamp With Extension
B3054WO - Malleable Iron Beam Clamp Without Extension (TOLCO Fig. 329)
E
Rod Take-Out
Clamping Rod and Nuts
Included
A
(Rod Size)
Hanger Rod Not
Included
E
Design Load Max. Iron Pipe Size Per UL Approx. Wt./100
Part No.
Lbs. (kN) in. (mm) Lbs. (kg)
B3054-
3
/8 730 (3.25) 4” (100) 236 (107.0)
B3054-
1
/2 1350 (6.00) 8” (200) 254 (115.2)
B3054-
5
/8 1365 (6.07) 10” (250) 260 (117.9)
B3054-
3
/4 1365 (6.07) 10” (250) 278 (126.1)
B3054-
7
/8 1365 (6.07) 10” (250) 292 (132.4)
Rod
Size
Rod Take Out 'E' For Beam Flange Width Of
Part No. A 3"
(76.2) 4" (101.6) 5" (127.0) 6" (152.4) 7" (177.8)
B3054-
3
/8
3
/8"-16 4
11
/16" (119.1) 4
9
/16" (115.9) 4
5
/8" (117.5) 4" (101.6) 3
1
/8" (79.4)
B3054-
1
/2
1
/2"-13 4
13
/16" (122.2) 4
1
/2" (114.3) 4
5
/16" (109.5) 3
15
/16" (100.0) 3
1
/4" (82.5)
B3054-
5
/8
5
/8"-11 4
7
/8" (123.8) 4
5
/8" (117.5) 4
3
/8" (111.1) 3
3
/4" (95.2) 3
5
/16" (84.1)
B3054-
3
/4
3
/4"-10 5
1
/8" (130.2) 5" (127.0) 4
5
/8" (117.5) 4
1
/4" (107.9) 3
3
/4" (95.2)
B3054-
7
/8
7
/8"-9 5
3
/16" (131.8) 4
7
/8" (123.8) 4
11
/16" (119.1) 4
5
/16" (109.5) 3
3
/4" (95.2)
B3054-Rod Size
B3054WO