Service manual

Easy Travel – Service Manual Rev. 0401 8
3.2 Handgrip pair
Kit number E0-00-1-070
Tools:
Silicone spray
Phillips #2 Screwdriver
1. Remove Control Panel Assembly, see
instructions 3.1
2. For serial # up to and including
0307076: open Screws (6-A) and
remove Control Panel Bottom Cover (6-
B)
3. Remove the Handgrips, (7-A)
4. Spray Handlebars (7-B) of the Column
Frame and inside of the new Handgrips
lightly
with Silicone Spray and push
them onto the Column Frame
5. Reassemble Control Panel Bottom
Cover and Control Panel Assembly
6. Push the Handgrips back over both
Covers
NOTE: Check that Handgrips do not slide off
of Covers easily – this can cause a safety
hazard if control lever gets caught under
Handgrip edge. Remove excess silicon if
needed.
Figure 7
Figure 6