Service manual

Easy Travel – Service Manual Rev. 0401 21
3.13 Gear Motor
Kit Number E0-00-1-035 (ET1)
Kit Number E0-00-1-094 (ET1B)
Tools:
Phillips #2 Screwdriver
Allen Key 5 mm
Cable Tie Tensioning Tool
Loctite Adhesive #242 (1312)
(For serial # up to and including 0212052:
Soldering Iron
Solder)
1. Remove Front Wheels, see instruction
3.11
2. Remove the Motor End Cover, see in-
struction 3.8 (for serial # starting with
11B it is not needed to remove Motor
End Cover)
3. Detach Power Cable from Gear Motor,
see instruction 3.10
4. Remove the Screws (19-A) securing the
Gear Motor to the Adapter Block
5. Apply Loctite to the Screws (19-A) and
secure with them the new Gear Motor to
the Adapter Block
6. Attach Power Cable to Gear Motor, see
instruction 3.10
7. Secure Motor End Cover, see instruction
3.8
8. Secure Front Wheels, see instruction
3.11
Figure 19