Service manual

Easy Travel – Service Manual Rev. 0401 12
3.5 Battery Contacts
Kit number E0-00-1-059
Tools:
Phillips #2 Screwdriver
1. Remove Controller Cover, see
instruction 3.3
2. Disconnect wiring to Controller (11-A)
and Interface Circuit Board (11-B)
3. Unscrew Screws (11-C) and remove
Battery Contacts Assembly (11-D)
4. Secure new Battery Contacts Assembly
(11-D) with Screws (11-C)
5. Connect Wiring (11-A) to Controller (red
to “B+” tab, black to “B-“ tab), Connector
(11-B) onto Interface Circuit Board
6. Reassemble Controller Cover, see
instruction 3.3
7. Check drive, brake and freewheel
operation
Figure 11