Datasheet
Bi-colour LED,T1 Bi-Pin
Illumination colour Lumi. Intensity Dom. Wavelength Forward voltage Part No.
Wiring
diagram
Red / Green 1000/1800 mcd 628 / 525 nm 1.9 / 3.5 VDC @ 20 mA 10-2603.320AL 352
Green / Yellow 1100/900 mcd 588 / 525 nm 2.0 / 3.2 VDC @ 20 mA 10-2603.320CL 352
Additional information
• The customer has to decide what series resistor shall be used to the LED
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight diffe-
rences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Wiring diagrams
Wiring diagram 352
Switching element with illumination and plug-in terminal
IP Protection Illumination colour Operating voltage Operation current Terminal Part No.
Wiring
diagram
IP40 Red 12 V DC ±10 % 10 mA Plug-interminal 84-8511.2320 354
Orange 12 V DC ±10 % 10 mA Plug-interminal 84-8511.3320 354
Yellow 12 V DC ±10 % 10 mA Plug-interminal 84-8511.4320 354
Green 12 V DC ±10 % 10 mA Plug-interminal 84-8511.5320 354
Blue 12 V DC ±10 % 10 mA Plug-interminal 84-8511.6320 354
White 12 V DC ±10 % 10 mA Plug-interminal 84-8511.9320 354
Red 24 V DC ±10 % 10 mA Plug-interminal 84-8511.2620 354
Orange 24 V DC ±10 % 10 mA Plug-interminal 84-8511.3620 354
Yellow 24 V DC ±10 % 10 mA Plug-interminal 84-8511.4620 354
Green 24 V DC ±10 % 10 mA Plug-interminal 84-8511.5620 354
Blue 24 V DC ±10 % 10 mA Plug-interminal 84-8511.6620 354
White 24 V DC ±10 % 10 mA Plug-interminal 84-8511.9620 354
Contacts: NO = Normally open
Additional information
• LED and built-in resistor included
• Standard version: Cable length 300 mm with insulated ferrule, plug-in terminal 2.8 mm x 0.5 mm
• Other options on request: Customisation of cable and connectors, rear side fully sealed (IP 67)
• Protection degree (rear side): IP 40, upgrade to IP 67 with plug Part No. 84-900 possible. With applicati-
ons where strong vibrations occure, the plugs may become loose
• Luminosity and wave length variations caused by LED manufacturing processes may cause slight diffe-
rences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Components
X2+
X
3+
X1–
01/2019 § eao.com
919
84
01
02
03
04
09
14
17
18
19
22
31
41
45
51
56
57
61
70
71
82
84
92
96