Stationary Compressor Operating Instructions Brands of stationary air compressors NOTICE Carefully read this instruction manual before attempting to operate this compressor.
Brands of stationary air compressors 1-800-551-2406 www.eaglecompressor.com Wear hearing protection. Wear eye protection. Wear respiratory protection.
TABLE OF CONTENTS Safety Precautions.................................................................................. 4 Cautions...................................................................................................... 4 Air receiver.................................................................................................. 4 Safety valve................................................................................................. 4 installation & operating instructions.............
SAFETY PRECAUTIONS Please familiarize yourself with the following information to prevent damage to your compressor unit and injury to the operator. CAUTIONS CAUTION The air compressor and motor will get hot while in operation. Never touch the discharge tubing, motor or compressor pump while in operation. The compressor operates automatically while the power is connected and turned on. WARNING Compressed air from the unit may contain hazardous fumes.
INSTALLATION & OPERATION INSTALLATION Proper care, maintenance and lubrication ensures longevity. The compressor should always be level for proper lubrication. Use only in a clean, dry, and well-ventilated area. The compressor has heat dissipation fins for proper cooling. Keep the fins and other parts that collect dust clean. Do not place rags or other materials on top of the compressor, as this obstructs cooling and can be a fire hazard.
INSTALLATION & OPERATION WIRING ... CONTINUED ALL WIRING INFORMATION IS STATED ON THE ELECTRIC MOTOR AND ON THE PRESSURE SWITCH OR PROVIDED WITH THE MAGNETIC STARTER, IF SUPPLIED. EAGLE USTOM ER SERVIE PERSONNEL , by BY LAW, PROVIDE ANY WIRING INFORMATION. Any warranty claims for electrical components can only be considered when submitted with proof of proper electrical installation.
INSTALLATION & OPERATION COMPRESSOR LUBRICATION ... CONTINUED Eagle compressor oil is a non-detergent mineral oil formulated with additives to help minimize carbon build-up, increase ring life and reduce oil consumption, for use at ambient temperatures of 0° to 30°C (32°F - 86°F). OTHER APPROVED OILS. Regular mineral oils can also be used in Wood Industries, Inc. compressors.
INSTALLATION & OPERATION MAINTENANCE Before doing any maintenance or adjustments to your air compressor, the following safety precautions should be taken: ► TURN OFF AND LOCK OUT ELECTRIC POWER. ► DRAIN AIR RECEIVER AND AIR LINES OF AIR PRESSURE. CHECKING BELT TENSION (If belt driven) Adjust belt(s) so when pressure is applied at the center, there is approximately 1/2” slack (see diagram “Figure A” below). If the belt is installed too tight, the motor might be overloaded.
OPERATING YOUR AIR COMPRESSOR EXTRA CARE SHOULD BE TAKEN TO AVOID PERSONAL INJURIES WITH AUTOMATIC CONTROLLED COMPRESSORS. 1) Check unit for any damage. All compressors are tested and inspected at the factory and supplied in perfect condition. Any damage is the freight carriers’ responsibility and you must notify the freight company immediately upon discovering any damage, and submit a claim. Ensure you have documented the damage on the waybill receipt if possible.
MAINTENANCE SCHEDULE DAILY OR BEFORE EACH USE ► CHECK OIL LEVEL. ► Drain condensation from air receiver. ► Check for any unusual noise or vibration. ► Be sure all nuts and bolts are tight. WEEKLY ► Turn off power. Clean dust and foreign matter from cylinder head, motor, fan blades, intercooler and air receiver. ► Clean air filter by opening air filter, removing filter element and cleaning it thoroughly with soapy water. Rinse thoroughly and allow to dry completely before assembly.
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Will not start Incorrect power supply and/or Make sure power is turned wiring. on. (Consult with a licensed electrician). Air receiver is at full pressure. Drain air receiver. Low pressure Safety valve leaks. Oil in discharge Compressor overheats Replace safety valve. Drain cock open. Close drain cock. Loose tubes or fittings. Tighten fittings. Dirty or plugged air filter. Clean or replace as necessary. Defective unloader valve.
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Insufficient output, low discharge pressure Clogged inlet filter. Clean or replace as necessary. Leaks in air lines, air valves, fittings, etc... Replace worn components as necessary. Drive belts slipping. Tension V-belts. Drain valve left open. Close drain valve. Defective pressure gauge. Replace pressure gauge. Leaking head gasket. Replace head gasket. Dirty or plugged inter cooler tubes. Remove and clean inter cooler tubes.
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Excessive vibration / compressor knocks Loose compressor, motor or engine guard. Tighten components. Compressor not level. Level compressor Feet bolts over tightened to floor. Loosen feet bolts. Excessive discharge pressure. Reduce operating pressure. Wrong oil being used. Drain and replace with proper oil. Loose flywheel, drive, pulley or drive belts. Tighten loose components and check belts.
TROUBLE SHOOTING PROBLEM Piston rings not seated. POSSIBLE CAUSE CORRECTIVE ACTION Allow 100 hours of normal operation for new rings to seat. Drain oil and refill with Eagle EAOIL oil or other approved oil.
EAGLE STANDARD WARRANTY Seller warrants products of its own manufacture against defects in workmanship and materials under normal use and service as follows: Brand COMPRESSORS: months from date of purchase. PARTS: from date of sale 12 Months 12 months 243onths 90 Days 90 Days 90 Days Wood Industries, Inc.
Marques des compresseurs d’air fixe 1-800-551-2406 www.eaglecompressor.com Protection d’audition d’usage. Protection visuelle d’usage. Protection respiratoire d’usage. Lire le manuel d’instruction.