Owner`s manual

Page 5
1. Slide on the two collars as pictured. See Figure 1
2. Insert wand into the power head neck until it stops. Slide
the small collar into the neck of the power head. Screw the
large collar onto the powerhead until tight. See Figure 2
3. Firmly press the two wands together.
4. Firmly press upper bent wand into the straight wand.
5. Attach two cord hangers to wand and cord.
See Figure 3
6. Evenly attach 3 cord hangers to the hose and cord.
7. Plug power head into the power head receptacle.
See Figure 4
POWER HEAD AND WAND ASSEMBLY INSTRUCTIONS
Locking Collars
Figure 1
Figure 2
Figure 3
Figure 4