Fish-finding Sonars & Mapping GPS Model FishElite 502C iGPS Manual Installation and Operation Instructions

122

Fig. 4. Point (3) set at channel mouth. Fig. 5. Waypoint (4) set further

south along the beach, at a recognizable landmark (Bob Hall Pier).

Waypoint PLFM Q W ends the route at an oil platform some distance

from the shore. Fig. 6. Press EXIT to save the route and you return to

this screen.

6. Move the cursor to the next point in the route, a spot where you need

to turn or change direction and press

ENT to set the next waypoint.

7. Repeat step six until the route reaches your destination.

8. To save your route, press

EXIT. The unit reverts to the Edit Route

screen, with the route automatically named "Route 1" and stored in the

unit's internal memory.

You can edit the route and run other commands, but if you are finished

with the route for now, return to the last page displayed by

pressing

EXIT repeatedly.

NOTE:

When adding waypoints to an existing route, the inserted way-

points will appear in the route in front of the waypoint you have

selected in the Edit Route menu. To insert waypoints at the end of

the route, make sure to select

(ROUTE END) before adding them.

Delete a Route

1. From the

NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE

press MENU|MENU|↓ to ROUTE PLANNING|ENT.

2. Press ↓ to route name|

ENT.

3. Use the arrow keys to select

DELETE ROUTE from the action win-

dow|

ENT|← to YES|ENT.