User's Manual
Table Of Contents
- SAFETY TRAINING INFORMATION
- QUICK REFERENCE GUIDE
- FEATURES
- CONTROLS AND DISPLAY
- BASIC OPERATION
- GENERAL FEATURES
- STANDARD GROUP CALLS
- TELEPHONE CALLS
- LTR-NET AUXILIARY CALLS
- OPTION SWITCHES AND MENU MODE
- DIAL MODE
- SYSTEM AND GROUP SCANNING
- LTR-NET AND LTR FEATURES
- LTR-NET FEATURES
- LTR FEATURES
- CONVENTIONAL FEATURES
- MISCELLANEOUS
- INDEX
- TABLE OF CONTENTS
MISCELLANEOUS
57
OUT-LOCK - Indicates that the synthesizer is unlocked. Refer to
“Transceiver Service” on page 61 for more information.
PROG ERR - Indicates an EEPROM read error. Refer to “Transceiver
Service” on page 61 for more information.
SLEEPING - Indicates that the transceiver has been temporarily disabled
by the system operator. It will be automatically enabled again when oper-
ation can be resumed.
SQUELCH - Indicates that the conventional squelch adjust mode is
selected (see page 49).
TIMEOUT - Indicates that the transmitter has been disabled by the
Time-Out Timer (see page 28).
TX DISBL - Indicates that the transmitter has been disabled because the
selected group is receive-only (see page 27).
TX INHIB - Indicates that the transmitter has been disabled by the
Transmit Inhibit feature (see page 46).
Menu Mode Messages
The following messages are displayed in the menu mode that is
described starting on page 35. The enabled or “yes” condition is indicated
by “ON”, and the disabled or “no” condition by “OFF”.
BACKLGHT - Backlight enable/disable
• ON or OFF
BANK SEL - Bank select
• Bank alpha tag
ENCRYPT - Encryption select
• ON or OFF