Manual

31
11. AUDIO INPUT
Here you can connect one or two source devices
with stereo audio high level output and their
signals are mixed to the amplifier.
12. PRE OUT
If desired, attach a recording device or subwoofer
here, for example. The stereo signal of this recor-
ding output is identical to the mixed signal from the
input sources.
13. SIGNAL IN
With this switch you can adjust the sensitivity of
the two stereo inputs of the amplifier (9) to stron-
ger input signals with the setting “LOW”. Normal
setting is “HIGH”. The signal of the microphone
input (2) remains unaffected by this.
14. TO SPEAKER
Output sockets with screw clamps for connecting
one pair of loudspeakers. Loudspeaker cables with
4 mm banana connectors may be used.
15. AC 230V 50Hz
Connect this mains cable to a suitable electricity
supply.
16. BT Antenna
Antenna for BT signals.
17. A-S ON/OFF
Switch for Autostandby ON/OFF (see also page 39).
E-SA18 MKBT_A6_quer_RZ_Okt.qxp_Layout 1 30.09.21 09:47 Seite 31