Studio Series Installation Manual S4-C65 S4-DVC65 S4-C80 S4-W65 S4-W80
Welcome to the custom install Studio Series and thank you for choosing a Dynaudio Custom Install product. The Studio Series comprises the S4-C65, S4-DVC65 and S4-C80 in-ceiling speakers and the S4-W65 and S4-W80 in-wall speakers. 1. Introduction This manual describes the installation of Studio Series speakers akers within drywall/plasterboard walls and ceilings.
• Studio Series speakers are uniquely simple to install. Once a ceiling or wall cut-out is created, no tools are required and installation can be completed by one person without assistance. Every element of the Studio Series installation procedure, from unpacking the speakers to painting and fitting the magnetic grilles is simplified and streamlined by design.
1.1 Carton Contents The carton contents for all Studio Series in-ceiling and in-wall speakers are essentially the same. Items only differ in terms of ceiling/wall format and dimension. Within each carton can be found: es inNote: Square grilles are optionally available for Studio Series tailer/ ceiling speakers. Contact Dynaudio directly or your local retailer/ distributor for more information.
2. Preparation 2.1 Dimensions Each Studio Series speaker requires specific ceiling or wall cut-out dimensions, mounting depth space and drywall (plasterboard) thickness constraints. These dimensions are tabulated below and illustrated in Diagram 2. Model S4-C65 Cut-out size 210 mm Minimum Clear Depth 154.5 mm Drywall (Plasterboard) thickness X = 36.5 mm max / 7.5 mm min (81⁄4 in) (61⁄16 in) 17⁄16 in max / 5⁄16 in min S4-DVC65 210 mm (81⁄4 in) 167 mm (69⁄16 in) X = 48.5 mm max / 7.
Diagram 2 S4-DVC65 168.2 mm (6.62 in) X Ø 210 mm (81⁄4 in) S4-W65 90 mm (3.54 in) 90 mm (3.54 in) X 175 mm (67⁄8 in) 275 mm (1013⁄16 in) S4-W80 99 mm (3.90 in) 99 mm (3.
2.2 Back Boxes Studio Series speakers can be installed with back boxes in order to reduce sound transmission into adjacent rooms or to satisfy any local statutory building regulations. If back boxes are to be used they must be installed within the walls and ceilings before the drywall (plasterboard) is affixed to the studs or joists.
3. Speaker Positions 3.2 Stereo Audio The appropriate positions for Studio Series speakers within the installation space will depend on their application. Position guidelines and diagrams for Studio Series in-ceiling and in-wall models are covered in the following sections and illustrated in the accompanying diagrams. In-ceiling Speakers: If a pair of Studio Series in-ceiling speakers peakers are required for stereo audio reproduction, they should ideally ally be located between 3 m (10 ft) and 5 m (16.
3.3 Multi-channel Audio Studio Series in-ceiling and in-wall speakers can be combined for multi-channel audio installations. In the majority of combined installations, in-wall speakers are best suited to front (left and right) and centre channel applications, and in-ceiling speakers more suited to surround channel applications.
Diagram 4 Multi-channel Audio Speaker Positioning >0.5 m (>1.6 ft) Surround Surround Left 0.4 m - 0.6 m (1.3 ft - 1.9 ft) Surround Centre Right >0.5 m (>1.6 ft) Surround >0.5 m (>1.6 ft) Centre Left Right <0.5 m (<1.6 ft) Note: Dipole mode is selected via a switch on the rear of the S4-DVC65. Speakers used in Dipole mode must be connected to only one amplifier channel. The dipole switch should not be used if a S4-DVC65 is connected to two amplifier channels for use in stereo.
4. In-ceiling Speaker Installation Note: These installation instructions broadly assume that speaker cables are pre-installed in ceilings and walls. To install a Studio Series in-ceiling speaker, proceed as described in the following paragraphs and accompanying diagrams: • Having selected the installation position and checked for the presence of studs (joists), pipe work, ducts or cables, mark a cut-line on the ceiling using the supplied template.
Note: To remove the Speaker Unit from the Installation Frame turn the locking tabs 90° counter-clockwise. Take care to support the speaker as the locking tabs are released. 5 With the speaker connected and secured into the Installation Frame, its bass/mid driver orientation and tweeter angle can be adjusted. In most installations, the orientation and angle should be adjusted so that the drivers face towards the listening position.
3 4a – + S4-C65/C80 4c 4b – + – + Mode switch (Normal selected) S4-DVC65 Normal Mode – + Mode switch (Dipole selected) S4-DVC65 Dipole Mode 5 Rotate speaker to adjust bass/mid driver directivity Tilt to adjust tweeter directivity Switch to adjust tweeter level. Push to click. Three locations. Rotate clockwise to lock. Rotate counter-clockwise to release.
5. In-wall Speaker Installation speaker spring terminals. Ensure that the positive conductor onductor is connected to the red speaker terminal and the negative gative conductor is connected to the black speaker terminal. al.
Diagram 6 1 2 3 4 – + 5 Switch to adjust tweeter level Push to click. Four locations. Rotate clockwise to lock. Rotate counter-clockwise to release.
Specifications Studio Series Data Type S4-C65 S4-DVC65 S4-C80 S4-W65 S4-W80 2-way in-ceiling 2-way in-ceiling 2-way in-ceiling 2-way in-wall 2-way in-wall Tweeter: 25 mm (1 in) 2 x Tweeter: 25 mm (1 in) Tweeter: 25 mm (1 in) Tweeter: 25 mm (1 in) Tweeter: 25 mm (1 in) Bass/mid: 165 mm (61⁄2 in) Bass/mid: 165 mm (61⁄2 in) Bass/mid: 200 mm (8.0 in) Bass/mid: 165 mm (6.1⁄2 in) Bass/mid: 200 mm (8.
In-Surface Dynaudio Custom Architectural Studio Series Speakers
Dynaudio’s innovative new range of high performance custom-install loudspeakers utilizes the same core technologies and research that have made the JVTWHU`»Z OP Ä H\[VTV[P]L HUK WYV Z[\KPV ZWLHRLYZ so successful over the past 40 years. In-Surface Its Denmark-based engineers and designers have years of experience in extracting maximum performance from limited spaces and in challenging conditions. And now all that expertise has been poured into this series of unique tool-free, clip-in loudspeaker modules.
In-Home
In-Loft So, your castle is a condo – it’s you all the way. The sound has to be crisp, subtle, clear, powerful...shall we go on? You get it. Dynaudio Custom Architectural speakers are the ideal way to make use of your space – even when it’s a massive loft. Homeowners with multichannel home-theater systems can use the ceiling speakers in the walls, too, to ensure absolute tonal consistency.
In-Life You have a passion for fantastic sound. Could be a family movie with everyone in your home-theater. Could be that winning goal. Might even be some classic Vivaldi? Time you started sharing. 7KH LQ FHLOLQJ PRGHOV DUH DQJOHG GHJUHHV DQG FDQ EH URWDWHG D IXOO GHJUHHV LQ WKHLU PRXQWV WR ıQH WXQH their sound to your listening area. 7KH\ ıW LQWR WKHLU PRXQWV ZLWKRXW GDPDJLQJ WKH FHLOLQJ VXUIDFH DQG WKHLU SDLQWDEOH VTXDUH RU URXQG PDJQHWLF JULOOHV ensure that they’ll blend in with the room.
Dynaudio Custom The Dynaudio Custom Architectural Studio Series is engineered without compromise. We’ve developed cutting-edge mechanical solutions that solve the problems installers face – making the process as fuss-free as possible. The in-wall HUK PU JLPSPUN MYHTLZ HYL KLZPNULK [V YL[YVÄ[ PU[V THU` WVW\SHY HUK L_PZ[PUN J\[ V\[Z HUK ^L»]L KLZPNULK [OLZL WYL PUZ[HSS MYHTLZ ^P[O WH[LU[ WLUKPUN IHўL SH[JOLZ MVY \S[YH ZPTWSL [VVS SLZZ ZWLHRLY Ä[[PUN Architectural Studio Series Speakers We designed the D
;OL +`UH\KPV *\Z[VT (YJOP[LJ[\YHS Z`Z[LT PZU»[ H YPNPK VUL ZPaL UL]LY X\P[L Ä[Z YHUNL VM WYVK\J[Z @V\»SS ZLL [OH[ from the ingenious way it’s mounted. The frames are pre-installed during construction or renovation (the house can IL ÄUPZOLK HYV\UK [OLT (UK [OLU ^OLU P[»Z [PTL `V\Y L_WLY[ PUZ[HSSLY JVTLZ [V Ä[ HUK ÄUL [\UL [OL ZWLHRLYZ ¶ ZV P[»Z L_HJ[S` YPNO[ ÄYZ[ [PTL (UK HSS ^P[OV\[ KHTHNPUN [OL KLJVY VY OH]PUN [V W\SS HU`[OPUN HWHY[ Dynaudio Custom Architectural Studio Series Speakers ;LJOUPJH
They’re available through an extensive network of the most knowledgeable and skilled dealers and integrators: the kind of people who simply won’t compromise – because they understand that only the best will do. For you. Dynaudio Custom Architectural Studio Series speakers are designed, tuned, and built with the same care and pride as our world-class KL ı LQ FDU DQG SUR DXGLR UDQJHV In-Surface Dynaudio has spent decades researching, YLÄUPUN HUK OHUK I\PSKPUN ZWLHRLYZ H[ P[Z headquarters in Skanderborg,
Dynaudio Custom Architectural Studio Series Speakers Dynaudio A/S 8660 Skanderborg Denmark www.dynaudio.com All text and image copyright reserved. Subject to change without notice.
