User's Manual

5.5. INSTALLATION

In order to use Suunto Training Manager you will need to install both the Suunto

Training Manager software and appropriate Suunto USB drivers.

5.5.1. Installing Suunto Training Manager

To install Suunto Training Manager:

1. Insert the Suunto Training Manager CD-ROM into the drive.

2. Wait for the installation to begin and follow the installation instructions.

NOTE: If the installation does not start automatically, click Start --> Run and type

D:\setup.exe.

5.5.2. Installing USB drivers for Suunto sport instruments

These instructions assume that you are installing Suunto Sports Instrument drivers on

a clean system, i.e. one that does not contain any Suunto Sports Instrument drivers. If

this is not the case, uninstall the previously installed drivers before proceeding with

the installation. See section 5.4 Uninstalling Suunto Sports Instrument drivers for

more information.

WINDOWS 98

The installation is in two parts. First you install the drivers for the Suunto Sports

instrument and then for the virtual USB serial port.

To install the Suunto Sports Instrument:

1. The drivers are located on your PC software installation CD-ROM. Insert the CD-

ROM into your computer.

2. Attach the Suunto Sports Instrument PC interface cable to the computer USB port.

The Add New Hardware Wizard is activated.

3. Click Next.