User Manual

NI** (NI-MH/NI-CD) CYCLE CHARGING

1. Connect the banana plugs of the battery adapter cable to the charge port.

Conﬁ rm the positive and negative connectors match, red to red (positive to

positive) and black to black (negative to negative).

2. Connect the battery connector to the battery adapter cable.

3. Press the Batt / PROG Stop button to access the root menu. Press the

DEC or INC button to scroll through the main menu screens until you reach

Program Select=Ni-MH/Ni-Cd.

4. Press the ENTER / Start button.

5. Press the DEC or INC button until Ni-MH/Ni-Cd CYCLE appears.

6. Press the ENTER / Start button to select the cycle direction. The direction

may be changed with the lettering is ﬂ ashing, press the DEC or INC button

to change between CHG>DCHG or DCHG>CHG.

7. Press the ENTER / Start Button to deﬁ ne the number of cycles. When the

number ﬂ ashes number of cycles can be set with the DEC or INC button.

Current settings for charge and discharge rates will be applied for Ni**

cycling

8. Once the parameters are set, press and hold the ENTER / Start button for

3 seconds.

9. The charger will check the battery and charger settings and charging will

begin.

10. Press the DEC or INC Button to see the rest of the Cycle information.

11. Press Batt / PROG Stop at any time to stop discharging.

12. When cycling is complete, the charger will sound a series of beeps.

13. Disconnect the battery from the charger when the cycle is complete.

Ni** CYCLE

CHG>DCHG 1