Manual

3. Using the internal power amplifier for monitoring or side-fill purposes:
In case you want to use an external power amplifier to drive your main speaker systems, the internal power amplifier
can be used for monitoring and side-fill purposes. Use short patch-cables to connect the AUX3 OUTPUT with the
EQ INPUT L and the MONO OUTPUT with the EQ INPUT R. This enables you to use the internal graphic equalizer
to separately adjust the signals of the monitor and the side-fill output channels. The volume of the main channels can
still be controlled via the master faders. The monitor speakers’ volume is determined by the setting of the AUX3 fader
while the MONO-fader controls the volume of the side-fill channel.
4. Monaural sound reinforcement with monitoring:
Your application does not demand for stereophonic audio reproduction. In that case you can use short patch-cables
to connect the MONO OUTPUT with the EQ INPUT R and the AUX3 OUTPUT with the EQ INPUT L. The right main
output is used for the sound reinforcement while the left main output carries the monitor signal.
MASTER PATCHBAY AND INSTALLATION ALTERNATIVES
55