Installation Manual

ManualsBrandsDYMO ManualsLabel MakersDYMO LabelWriter Wireless Printer, Black (2002150)

Connecting the LabelWriter Wireless Label Printer to your Wireless Network

You will need the wireless network name (SSID) and password or passphrase available to

complete the configuration steps below.

1 After the printer has been turned on

for at least 10 seconds, on your

computer connect to the wireless

network named DYMOLWWxxxxxx,

Where xxxxxx is the unique name for

the printer.

This unique printer name can be

found on the sticker on the bottom of

the printer.

2 In a new Internet browser tab, enter

the following URL: http://

192.168.58.1 and press Enter.

This will open the LabelWriter Web

Configuration Utility.

3 Log in to the Web Configuration Utility

by entering the following username

and password and click Sign in:

Username: admin

Password: admin

4 On the Name your Printer page,

click Next to accept printer name.

Summary of content (4 pages)

PAGE 1
Connecting the LabelWriter Wireless Label Printer to your Wireless Network You will need the wireless network name (SSID) and password or passphrase available to complete the configuration steps below. 1 After the printer has been turned on for at least 10 seconds, on your computer connect to the wireless network named DYMOLWWxxxxxx, Where xxxxxx is the unique name for the printer. This unique printer name can be found on the sticker on the bottom of the printer.
PAGE 2
5 On the Connect your printer page, click Next to accept the recommended DHCP connection. 6 On the Connect your printer to a wireless network page, click Connect next to the name of the wireless network you want to connect your printer to. This should be the same wireless network that the computer you will print labels from is connected to. 7 When prompted, enter the password or passphrase for this wireless network and click Connect.
PAGE 3
Printing Labels from DYMO Label Software on your Computer Make sure your computer is on the same wireless network as the LabelWriter Wireless printer. 1 If you haven’t already done so, download and install the latest version of DYMO Label software from the Support area of the DYMO.com web site. 2 Start the software and do one of the following: • If this is the first DYMO label printer installed, click Yes when prompted by the software to add the label printer as a wireless printer.
PAGE 4
Printing Labels from DYMO Connect on your Mobile Device Make sure your mobile device is connected to the same wireless network as the LabelWriter Wireless printer. 1 Download and install the latest version of DYMO Connect from the Apple or Google App store. 2 On your mobiledevice, tap to open the app. If the LabelWriter Wireless is selected as the current printer, you are ready to print labels.