Use and Care Manual

ManualsBrandsDyconn ManualsBathEdison Crystal 88 in. x 38 in. Single LED Wall Mounted Bathroom Mirror with Touch On/Off and Anti-Fog Function

PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE FOR PRODUCT

OPERATION AND MAINTENANCE.

Product Features:

Frameless backlit Mirror

Extra thick frosted LED light

Can be hung vertical or horiztonal

Touch switch on & o

Anti-fog pad

LED Backlit Mirror

Sizes: 48” W x 36”H (horizontal or vertical)

60” W x 35”H (horizontal or vertical)

70” W x 38”H (horizontal or vertical)

Model:

Catella M09AT, Catela-Plus M10AT, Royal M12AT,

Edison M13AT, Swan M14AT, Egret M16AT

For easy installation of your Dyconn Mirror please do the following:

Thoroughly read all instructions before installing the enclosed product.

Read and take note of all safety, care, and maintenance information.

www.dyconnfaucet.com

E491008

Summary of content (12 pages)

PAGE 1
Product Features: Frameless backlit Mirror Extra thick frosted LED light Can be hung vertical or horiztonal Touch switch on & o Anti-fog pad LED Backlit Mirror Sizes: 48” W x 36”H (horizontal or vertical) 60” W x 35”H (horizontal or vertical) 70” W x 38”H (horizontal or vertical) Model: Catella M09AT, Catela-Plus M10AT, Royal M12AT, Edison M13AT, Swan M14AT, Egret M16AT For easy installation of your Dyconn Mirror please do the following: Thoroughly read all instructions before installing the enclosed pr
PAGE 2
PAGE 3
Warning: Please read!! electrician. 2. During installation please make sure the circuit breaker or the with a live line on. 3. It is recommended to have at least two people available to install the mirror. Remember to wear proper protective gear during installation. All mirror glass is non-tempered glass and can result in sharp shards if the glass is shattered. wall. Using the proper anchor and screws for securing the unit to the wall is crucial. Screwing to the stud is recommended.
PAGE 4
Product Description & Information Package Content: • Frameless backlit Mirror • Extra thick frosted LED light • Can be hung vertical or horizontal • Touch switch on & o • Touch switch dim function • Anti-fog pad • LED backlit Mirror • Screws • Studs Vertical Mount Lock catch (Horizontal hanging only) Horizontal Mount Mirror Touch switch Anti-fog pad Lock catch (Horizontal hanging only) Horizontal Mount Product Features: E491008
PAGE 5
Horizontal Mount Lock catch (Horizontal hanging only) Handles Vertical Mount Horizontal Mount Back Frame Warning: Al installation and maintenance. Do not switch on the electrical supply at the mains until the end of the installation.
PAGE 6
Installation Steps First, decide whether you want to hang your mirror vertically or horizontally. It is advisable to have one more person help you install the mirror. Horizontal Mounting 1.Have one person hold the side of the mirror while another person holds the back frame. Pull the bottom of the glass out from the back frame and lift up to separate these two parts. 2. Use an I-Beam level to mount the back frame onto the wall.
PAGE 7
Vertical Mounting 1.Have one person hold the side of the mirror while another person holds the back frame. Pull the bottom of the glass out from the back frame and lift up to separate these two parts. Vertical Mount Horizontal Mount Lock catch (Only when hung horizontally) Handles 2. Remove the two horizontal mounts on the back of the frame. Line up the holes on the bracket with the holes placed for the vertical mount and screw the bracket in.
PAGE 8
LED Mirror Power Source FAQ Internal Power Flow Diagram Scenario 1 (Direct Wired) This is the most common way to connect the mirror. The LED light & anti fog pad are both controlled by the built-in touch switch on the mirror. *The LED light is dimmable. 110VAC Input Power Source: Constant 110AC power 110VAC -12VDC LED driver Output Anti-fog pad Output Dimmer Switch 12V LED Light Scenario 2 (Wall Switch) By doing so, the mirror is now bridged to the wall switch.
PAGE 9
Introducing Tri-Color Mirrors and Additional Features In the near future, Dyconn Faucet will be upgrading our mirror products to include tri-color options and additional features.
PAGE 10
Dyconn Faucet LED Mirror 48-inch and above Frequently Asked Questions & Troubleshooting Guide 1. Can I connect to a dimmer on the wall to dim the mirror (ELV or non ELV dimmer) Answer: Unfortunately, no, the mirror cannot be connected to an ELV dimmer or traditional non-ELV dimmer switch. All Dyconn Faucet mirrors contain low voltage LEDs and the power supply will not work properly if the source AC is altered through a wall AC dimmer. 2. Can I connect to a non-dimmer wall switch? Answer: Yes.
PAGE 11
Wall Switch Bypass Instructions 3. 2. Numbers will correspond to following tags attached to the wires 1. + - 12 2. LED 3. E491008 Use the following steps to wire mirror to an electrical wall switch and bypass the touch sensor: 1. Disconnect all connections from the touch sensor (#1-3). 2. Connect the LED Power Supply directly to the 12V DC LED Connector (#1 and #2 circled in red).
PAGE 12
Manufacturer Limited Warranty E491008 All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada.