Specification

Replace back up battery
Steps:
1.Pull out power plug.
2.Lift toilet seat lid.
3.Take out battery cover.
4.Put battery in right position
5.Press flush button, be sure it can flush normally.
6.Put cover back and fix toilet seat lid.
Only 820ZA/825ZA/830ZA equipped back up power.
Note:
Please use 9V alkaline battery for back up battery.
Please recycle old battery properly.
Spare battery
Battery installation
1.Use tool to remove remote control and its backside cover.
2.Use tool or coin negatively rotate “+” shape groove, then remove battery cover,
do not fall out seal ring.
3.Put button battery into battery hole, upturn battery cathode(with letter side)
4.Put battery cover back, use tool or coin install cover, seal ring should be well
installed.
5.Put remote control cover back.
Replace the remote control battery
Replace the battery when the remote control is not sensitive.
Notice:
Place battery correctly.
Please take out battery when not in use for a long time .
Remote control Button battery Battery cover Remote control cover
Seal ring
Open position
19 20